[PATCH] drm/bridge/synopsys: dsi: Add 1.31 version support

Philippe CORNU philippe.cornu at st.com
Sun Feb 4 12:34:21 PST 2018


Hi Archit,

and many thanks for your comments

On 02/04/2018 04:13 PM, Archit wrote:
> Hi Phillipe,
> 
> On Saturday 03 February 2018 03:49 AM, Philippe CORNU wrote:
>> Hi Archit, Andrzej, Laurent & Brian,
>>
>> What is your opinion regarding this patch? Do you have any advice for
>> handling hw versions?
>>
>> Do not hesitate to comment.
> 
> The patch looks mostly good to me. One query below.
> 
>>
>> Many thanks,
>> Philippe :-)
>>
>>
>> On 01/22/2018 04:08 PM, Philippe Cornu wrote:
>>> From: Philippe CORNU <philippe.cornu at st.com>
>>>
>>> Add support for the Synopsys DesignWare MIPI DSI version 1.31
>>> Two registers need to be updated/added for supporting 1.31:
>>> * PHY_TMR_CFG 0x9c (updated)
>>>     1.30 [31:24] phy_hs2lp_time
>>>          [23:16] phy_lp2hs_time
>>>          [14: 0] max_rd_time
>>>
>>>     1.31 [25:16] phy_hs2lp_time
>>>          [ 9: 0] phy_lp2hs_time
>>>
>>> * PHY_TMR_RD_CFG 0xf4 (new)
>>>     1.31 [14: 0] max_rd_time
>>>
>>> Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
>>> ---
>>>    drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 52 
>>> +++++++++++++++++++++++----
>>>    1 file changed, 46 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c 
>>> b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> index 735f38429c06..20a2ca14a7ad 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>> @@ -25,7 +25,13 @@
>>>    #include <drm/bridge/dw_mipi_dsi.h>
>>>    #include <video/mipi_display.h>
>>> +#define HWVER_130            0x31333000    /* IP version 1.30 */
>>> +#define HWVER_131            0x31333100    /* IP version 1.31 */
>>> +#define HWVER_OLDEST            HWVER_130
>>> +#define HWVER_NEWEST            HWVER_131
>>> +
>>>    #define DSI_VERSION            0x00
>>> +#define VERSION                GENMASK(31, 8)
>>>    #define DSI_PWR_UP            0x04
>>>    #define RESET                0
>>> @@ -161,11 +167,12 @@
>>>    #define PHY_CLKHS2LP_TIME(lbcc)        (((lbcc) & 0x3ff) << 16)
>>>    #define PHY_CLKLP2HS_TIME(lbcc)        ((lbcc) & 0x3ff)
>>> -/* TODO Next register is slightly different between 1.30 & 1.31 IP 
>>> version */
>>>    #define DSI_PHY_TMR_CFG            0x9c
>>> -#define PHY_HS2LP_TIME(lbcc)        (((lbcc) & 0xff) << 24)
>>> -#define PHY_LP2HS_TIME(lbcc)        (((lbcc) & 0xff) << 16)
>>> -#define MAX_RD_TIME(lbcc)        ((lbcc) & 0x7fff)
>>> +#define PHY_HS2LP_TIME_V130(lbcc)    (((lbcc) & 0xff) << 24)
>>> +#define PHY_LP2HS_TIME_V130(lbcc)    (((lbcc) & 0xff) << 16)
>>> +#define MAX_RD_TIME_V130(lbcc)        ((lbcc) & 0x7fff)
>>> +#define PHY_HS2LP_TIME_V131(lbcc)    (((lbcc) & 0x3ff) << 16)
>>> +#define PHY_LP2HS_TIME_V131(lbcc)    ((lbcc) & 0x3ff)
>>>    #define DSI_PHY_RSTZ            0xa0
>>>    #define PHY_DISFORCEPLL            0
>>> @@ -204,7 +211,9 @@
>>>    #define DSI_INT_ST1            0xc0
>>>    #define DSI_INT_MSK0            0xc4
>>>    #define DSI_INT_MSK1            0xc8
>>> +
>>>    #define DSI_PHY_TMR_RD_CFG        0xf4
>>> +#define MAX_RD_TIME_V131(lbcc)        ((lbcc) & 0x7fff)
>>>    #define PHY_STATUS_TIMEOUT_US        10000
>>>    #define CMD_PKT_STATUS_TIMEOUT_US    20000
>>> @@ -215,6 +224,7 @@ struct dw_mipi_dsi {
>>>        struct drm_bridge *panel_bridge;
>>>        struct device *dev;
>>>        void __iomem *base;
>>> +    u32 hw_version;
>>>        struct clk *pclk;
>>>        struct clk *px_clk;
>>> @@ -616,8 +626,14 @@ static void 
>>> dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>>>         * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
>>>         * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
>>>         */
>>> -    dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>>> -          | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>>> +    if (dsi->hw_version == HWVER_131) {
>>> +        dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(0x40) |
>>> +              PHY_LP2HS_TIME_V131(0x40));
>>> +        dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000));
>>> +    } else {
>>> +        dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V130(0x40) |
>>> +              PHY_LP2HS_TIME_V130(0x40) | MAX_RD_TIME_V130(10000));
>>> +    }
>>>        dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>>>              | PHY_CLKLP2HS_TIME(0x40));
>>> @@ -791,6 +807,28 @@ static const struct drm_bridge_funcs 
>>> dw_mipi_dsi_bridge_funcs = {
>>>        .attach          = dw_mipi_dsi_bridge_attach,
>>>    };
>>> +static void dsi_get_version(struct dw_mipi_dsi *dsi)
>>> +{
>>> +    u32 hw_version;
>>> +
>>> +    clk_prepare_enable(dsi->pclk);
>>> +    hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
>>> +    clk_disable_unprepare(dsi->pclk);
>>> +
>>> +    if (hw_version > HWVER_NEWEST) {
>>> +        DRM_DEBUG("hw version: use 0x%08x for this recent 0x%08x\n",
>>> +              HWVER_NEWEST, hw_version);
>>> +        hw_version = HWVER_NEWEST;
>>> +
>>> +    } else if (hw_version < HWVER_OLDEST) {
>>> +        DRM_DEBUG("hw version: use 0x%08x for this old 0x%08x\n",
>>> +              HWVER_OLDEST, hw_version);
>>> +        hw_version = HWVER_OLDEST;
> 
> I didn't understand the point of HWVER_NEWEST and HWVWER_OLDEST. We're
> not going to have a huge number of hw versions that we need to check if
> our version lies within a range. We should rather have a switch case
> which explicitly sets the hw_version vale based on what we read from
> the DSI_VERSION register.
> 

I totally understand your comment : )

My first implementation used a switch case with the 1.30 and 1.31 
versions (the 2 versions use by stm32). But default case was difficult 
to choose... Moreover, this patch with switch cases may be not 
compatible with rockchip if rockchip chipsets have older version than 
1.30 and I really did not want to push a patch that could break rockchip 
driver!
I do not know the dw dsi versions of rockchip, neither those of 
hisilicon nor those of imx... Anyway, I put the 1.30 version into the 
default case... But then I did not know how to manage newer versions 
(after 1.31)...
At the end, I pushed this patch with version number comparisons and 
oldest/newest stuffs because I am sure Rockchip driver will continue to 
work with it : )

If you prefer and as you suggested, I can push a patch with switch cases 
using 1.30 as the default version, it will work with actual rockchip 
driver too.

I will wait for more feedbacks (especially from Brian & Rockchip team) 
and do not hesitate to comment my comments.

Many thanks,
Philippe :-)


> The patch looks fine otherwise.
> 
> Thanks,
> Archit
> 
>>> +    }
>>> +
>>> +    dsi->hw_version = hw_version;
>>> +}
>>> +
>>>    static struct dw_mipi_dsi *
>>>    __dw_mipi_dsi_probe(struct platform_device *pdev,
>>>                const struct dw_mipi_dsi_plat_data *plat_data)
>>> @@ -870,6 +908,8 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
>>>            clk_disable_unprepare(dsi->pclk);
>>>        }
>>> +    dsi_get_version(dsi);
>>> +
>>>        pm_runtime_enable(dev);
>>>        dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;


More information about the linux-arm-kernel mailing list