[PATCH 09/15] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file

[Abhishek Sahu]

On 2018-01-29 10:41, Sricharan R wrote:
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
> ---
>  arch/arm/boot/dts/Makefile                      |  1 +
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 14 ++++++++++++++
>  2 files changed, 15 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 68e4b15..0104ba2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-ipq4019-ap.dk01.1-c2.dtb \
>  	qcom-ipq4019-ap.dk04.1-c1.dtb \
>  	qcom-ipq4019-ap.dk04.1-c5.dtb \
> +	qcom-ipq4019-ap.dk04.1-c3.dtb \
>  	qcom-ipq8064-ap148.dtb \
>  	qcom-msm8660-surf.dtb \
>  	qcom-msm8960-cdp.dtb \
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> new file mode 100644
> index 0000000..7a93fc4
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
> +
> +	soc {
> +		nand: qpic-nand at 79b0000 {
> +			status = "disabled";
> +		};

  Normally we need to disable in base dtsi and enable in
  board dtsi so that base dtsi will always work in all the
  boards. Now If We load the base dtsi in any DK04 board
  other than C1, then nand failure will come.

  Thanks,
  Abhishek