[PATCH] Revert "ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2"

[Icenowy Zheng]

This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.

The original commit has several problems:

- vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on, which
leads to system hang when disabling unused regulators.
- GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are not
considered, and will fail to work after adding this commit.

This indicates that this patch should be not tested at all.

Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
 arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57 ------------------------
 1 file changed, 57 deletions(-)

diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 51e6f1d21c32..a565316eb340 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -86,10 +86,6 @@
 	};
 };
 
-&cpu0 {
-	cpu-supply = <&reg_dcdc3>;
-};
-
 &ehci0 {
 	status = "okay";
 };
@@ -155,17 +151,6 @@
 	status = "okay";
 };
 
-&p2wi {
-	status = "okay";
-
-	axp22x: pmic at 68 {
-		compatible = "x-powers,axp221";
-		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
 &pio {
 	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin at 0 {
 		pins = "PA21";
@@ -191,48 +176,6 @@
 	};
 };
 
-#include "axp22x.dtsi"
-
-&reg_dc5ldo {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vdd-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.15.1