[PATCH v2 10/11] arm64: dts: r8a77965-salvator-x: Enable DU external clocks and HDMI

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Friday, 27 April 2018 19:57:21 EEST Kieran Bingham wrote:
> The DU1 external dot clock is provided by the fixed frequency clock
> generator X21, while the DU0 and DU3 clocks are provided by the
> programmable Versaclock5 clock generator.
> 
> Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board
> and hook it up to the HDMI connector.
> 
> Based on patches from Takeshi Kihara <takeshi.kihara.df at renesas.com>
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> v2:
>  - Remove LVDS clocks from DU node
>  - Merge DU Clocks and HDMI enablement
> ---
>  .../boot/dts/renesas/r8a77965-salvator-x.dts  | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts index
> 75d890d91df9..340a3c72b65a 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> @@ -19,3 +19,31 @@
>  		reg = <0x0 0x48000000 0x0 0x78000000>;
>  	};
>  };
> +
> +&du {
> +	clocks = <&cpg CPG_MOD 724>,
> +		 <&cpg CPG_MOD 723>,
> +		 <&cpg CPG_MOD 721>,
> +		 <&versaclock5 1>,
> +		 <&x21_clk>,
> +		 <&versaclock5 2>;
> +	clock-names = "du.0", "du.1", "du.3",
> +		      "dclkin.0", "dclkin.1", "dclkin.3";
> +};
> +
> +&hdmi0 {
> +	status = "okay";
> +
> +	ports {
> +		port at 1 {
> +			reg = <1>;
> +			rcar_dw_hdmi0_out: endpoint {
> +				remote-endpoint = <&hdmi0_con>;
> +			};
> +		};
> +	};
> +};
> +
> +&hdmi0_con {
> +	remote-endpoint = <&rcar_dw_hdmi0_out>;
> +};

-- 
Regards,

Laurent Pinchart