[PATCH v7 0/7] clk: meson-axg: Add AO Cloclk and Reset driver

Fri Apr 27 05:33:42 PDT 2018

Hi Jerome:

On 04/27/2018 05:59 PM, Jerome Brunet wrote:
> On Fri, 2018-04-27 at 17:31 +0800, Yixun Lan wrote:
>> hi Jerome:
>>
>>
>> On 04/27/18 17:20, Jerome Brunet wrote:
>>> On Thu, 2018-04-26 at 16:44 +0800, Yixun Lan wrote:
>>>>   This patch try to add AO clock and Reset driver for Amlogic's
>>>> Meson-AXG SoC.
>>>>   Please note that patch 7 need to wait for the DTS changes[3] merged
>>>> into mainline first, otherwise it will break the serial console.
>>>>
>>>>  patch 2: factor the common code into a dedicated file
>>>>  patch 3-5: add the aoclk driver for AXG SoC
>>>>  patch 6-7: drop unnecessary clock flags
>>>>
>>>> changes since v6 at [7]: 
>>>>  - fix over 80 chars chechpatch error
>>>>  - add Philip's Ack on patch 5
>>>>  - drop extra end of newline
>>>>
>>>> changes since v5 at [6]: 
>>>>  - drop unnecessary header files
>>>>  - add 'axg_aoclk' prefix to clk driver, make them more consistent
>>>>  - add missing end new line..
>>>>
>>>> changes since v4 at [5]: 
>>>>  - fix return err
>>>>  - introduce CONFIG_COMMON_CLK_MESON_AO
>>>>  - format/style minor fix
>>>>
>>>> changes since v3 at [4]: 
>>>>  - add 'const' contraint to the read-only data
>>>>  - switch to devm_of_clk_add_hw_provider API
>>>>  - check return value of devm_reset_controller_register
>>>>
>>>> changes since v2 at [2]: 
>>>>  - rework meson_aoclkc_probe() which leverage the of_match_data
>>>>  - merge patch 5-6 into this series
>>>>  - seperate DTS patch, will send to Kevin Hilman independently
>>>>  
>>>> changes since v1 at [0]: 
>>>>  - rebase to clk-meson's branch 'next/drivers' [1]
>>>>  - fix license, update to BSD-3-Clause
>>>>  - drop un-used include header file
>>>>
>>>> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan@amlogic.com
>>>> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
>>>> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan@amlogic.com
>>>> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan@amlogic.com
>>>> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan@amlogic.com
>>>> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan@amlogic.com
>>>> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan@amlogic.com
>>>> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan@amlogic.com
>>>
>>> Yixun,
>>>
>>> Your series looks mostly Ok to me, apart from the problem reported by Philipp.
>>>
>>> However, once applied, if the clkc ao controller is enabled, both gxl and axg
>>> fail to complete the boot. Could you please explain how this was tested ??
>>>
>>
>> isn't this caused by the patch 7?
>>  [PATCH v7 7/7] clk: meson: drop CLK_IGNORE_UNUSED flag
>>
>>
>> you need to also apply this DT patch which I've sent[1]:
>>  [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO
>>
>> could you exclude the patch 7 for now until Kevin merged the DT part?
>>
>> [1] https://lkml.kernel.org/r/20180328030130.240336-4-yixun.lan@amlogic.com
> 
> Looks to be the problem indeed. But it is still an issue with how your patchset
> in organized.
> 
> I can't merge this until Kevin merges the patch above, which he can't merge
> until there is the clkc_ao support in axg, which is given by this series.
> 
> 1# You should remove the axg part of the patch above. Kevin will be able to
> merge it w/o any dependencies. (BTW, the patch is broken for axg because 1) you
> did not include the dt-binding header for the clkc_ao in axg and 2) the clkc_ao
> does not exist at this stage)
> 2# I can then safely merge this series - w/o breaking gxbb and gxl.
> 3# Finally you'll have to make a DT change for the axg, enabling the clkc_ao and
> changes the uart clocks at the same time.
> 

  I didn't make myself clear in previous email

  I mean, could you merge patch 1-6, just exclude the patch 7
then kevin can merge the DT part (there are three patches) [1]
after the DT patches merged, then you can take this patch 7
This way, it won't break gxl or any other SoCs

  I'm sending patch 7 along with this series, it would be better if I
give a warning about it.

[1] https://lkml.kernel.org/r20180328030130.240336-1-yixun.lan@amlogic.com

>>
>>
>>> Not merging it until we get to the bottom of this.
>>>
>>>>
>>>>
>>>> Qiufang Dai (1):
>>>>   clk: meson-axg: Add AO Clock and Reset controller driver
>>>>
>>>> Yixun Lan (6):
>>>>   clk: meson: migrate to devm_of_clk_add_hw_provider API
>>>>   clk: meson: aoclk: refactor common code into dedicated file
>>>>   dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
>>>>   dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
>>>>   clk: meson: drop CLK_SET_RATE_PARENT flag
>>>>   clk: meson: drop CLK_IGNORE_UNUSED flag
>>>>
>>>>  .../bindings/clock/amlogic,gxbb-aoclkc.txt    |   1 +
>>>>  drivers/clk/meson/Kconfig                     |   8 +
>>>>  drivers/clk/meson/Makefile                    |   3 +-
>>>>  drivers/clk/meson/axg-aoclk.c                 | 163 ++++++++++++++++++
>>>>  drivers/clk/meson/axg-aoclk.h                 |  29 ++++
>>>>  drivers/clk/meson/gxbb-aoclk.c                |  95 ++++------
>>>>  drivers/clk/meson/gxbb-aoclk.h                |   5 +
>>>>  drivers/clk/meson/meson-aoclk.c               |  81 +++++++++
>>>>  drivers/clk/meson/meson-aoclk.h               |  34 ++++
>>>>  include/dt-bindings/clock/axg-aoclkc.h        |  26 +++
>>>>  include/dt-bindings/reset/axg-aoclkc.h        |  20 +++
>>>>  11 files changed, 401 insertions(+), 64 deletions(-)
>>>>  create mode 100644 drivers/clk/meson/axg-aoclk.c
>>>>  create mode 100644 drivers/clk/meson/axg-aoclk.h
>>>>  create mode 100644 drivers/clk/meson/meson-aoclk.c
>>>>  create mode 100644 drivers/clk/meson/meson-aoclk.h
>>>>  create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
>>>>  create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>>>>
>>>
>>> .
>>>
>>
>>
> 
> .
> 