[PATCH 05/11] PM / Domains: Allow a better error handling of dev_pm_domain_attach()

[Ulf Hansson]

The callers of dev_pm_domain_attach() currently checks the returned error
code for -EPROBE_DEFER and needs to ignore other error codes. This is an
unnecessary limitation, which also leads to a rather strange behaviour in
the error path.

Address this limitation, by changing the return codes from
acpi_dev_pm_attach() and genpd_dev_pm_attach(). More precisely, let them
return 0, when no PM domain is needed for the device and then return 1, in
case the device was successfully attached to its PM domain. In this way,
dev_pm_domain_attach(), gets a better understanding of what happens in the
attach attempts and also allowing its caller to better act on real errors
codes.

Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
 drivers/acpi/device_pm.c    |  6 +++---
 drivers/base/power/common.c |  7 ++++---
 drivers/base/power/domain.c | 19 ++++++++++---------
 include/linux/acpi.h        |  2 +-
 include/linux/pm_domain.h   |  2 +-
 5 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index d006300..a7c2673 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -1257,7 +1257,7 @@ int acpi_dev_pm_attach(struct device *dev, bool power_on)
 	struct acpi_device *adev = ACPI_COMPANION(dev);
 
 	if (!adev)
-		return -ENODEV;
+		return 0;
 
 	/*
 	 * Only attach the power domain to the first device if the
@@ -1265,7 +1265,7 @@ int acpi_dev_pm_attach(struct device *dev, bool power_on)
 	 * management twice.
 	 */
 	if (!acpi_device_is_first_physical_node(adev, dev))
-		return -EBUSY;
+		return 0;
 
 	acpi_add_pm_notifier(adev, dev, acpi_pm_notify_work_func);
 	dev_pm_domain_set(dev, &acpi_general_pm_domain);
@@ -1275,7 +1275,7 @@ int acpi_dev_pm_attach(struct device *dev, bool power_on)
 	}
 
 	dev->pm_domain->detach = acpi_dev_pm_detach;
-	return 0;
+	return 1;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
 #endif /* CONFIG_PM */
diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c
index f3cf61f..5e4b481 100644
--- a/drivers/base/power/common.c
+++ b/drivers/base/power/common.c
@@ -98,7 +98,8 @@ EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data);
  * Callers must ensure proper synchronization of this function with power
  * management callbacks.
  *
- * Returns 0 on successfully attached PM domain or negative error code.
+ * Returns 0 on successfully attached PM domain and when it found that the
+ * device don't need a PM domain, else a negative error code.
  */
 int dev_pm_domain_attach(struct device *dev, bool power_on)
 {
@@ -108,10 +109,10 @@ int dev_pm_domain_attach(struct device *dev, bool power_on)
 		return -EEXIST;
 
 	ret = acpi_dev_pm_attach(dev, power_on);
-	if (ret)
+	if (!ret)
 		ret = genpd_dev_pm_attach(dev);
 
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 EXPORT_SYMBOL_GPL(dev_pm_domain_attach);
 
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index b816adb..455ecea 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2180,10 +2180,11 @@ static void genpd_dev_pm_sync(struct device *dev)
  * Parse device's OF node to find a PM domain specifier. If such is found,
  * attaches the device to retrieved pm_domain ops.
  *
- * Returns 0 on successfully attached PM domain or negative error code. Note
- * that if a power-domain exists for the device, but it cannot be found or
- * turned on, then return -EPROBE_DEFER to ensure that the device is not
- * probed and to re-try again later.
+ * Returns 1 on successfully attached PM domain, 0 when the device don't need a
+ * PM domain or a negative error code in case of failures. Note that if a
+ * power-domain exists for the device, but it cannot be found or turned on,
+ * then return -EPROBE_DEFER to ensure that the device is not probed and to
+ * re-try again later.
  */
 int genpd_dev_pm_attach(struct device *dev)
 {
@@ -2192,12 +2193,12 @@ int genpd_dev_pm_attach(struct device *dev)
 	int ret;
 
 	if (!dev->of_node)
-		return -ENODEV;
+		return 0;
 
 	ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
 					"#power-domain-cells", 0, &pd_args);
 	if (ret < 0)
-		return ret;
+		return 0;
 
 	mutex_lock(&gpd_list_lock);
 	pd = genpd_get_from_provider(&pd_args);
@@ -2218,7 +2219,7 @@ int genpd_dev_pm_attach(struct device *dev)
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "failed to add to PM domain %s: %d",
 				pd->name, ret);
-		goto out;
+		return ret;
 	}
 
 	dev->pm_domain->detach = genpd_dev_pm_detach;
@@ -2230,8 +2231,8 @@ int genpd_dev_pm_attach(struct device *dev)
 
 	if (ret)
 		genpd_remove_device(pd, dev);
-out:
-	return ret ? -EPROBE_DEFER : 0;
+
+	return ret ? -EPROBE_DEFER : 1;
 }
 EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 15bfb15..c01675b 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -899,7 +899,7 @@ static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
 static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
 static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
 {
-	return -ENODEV;
+	return 0;
 }
 #endif
 
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 04dbef9..a1da66e 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -280,7 +280,7 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn,
 
 static inline int genpd_dev_pm_attach(struct device *dev)
 {
-	return -ENODEV;
+	return 0;
 }
 
 static inline
-- 
2.7.4