[PATCH] mtd: nand: davinci: don't acquire and enable clock

Bartosz Golaszewski brgl at bgdev.pl
Wed Apr 25 01:53:42 PDT 2018


2018-03-30 16:30 GMT+02:00 Sekhar Nori <nsekhar at ti.com>:
> NAND itself is an asynchronous interface, it does not have any
> clock input. DaVinci NAND driver acquires clock for AEMIF
> (asynchronous external memory interface) which is an on-chip
> IP to which NAND is connected.
>
> The same clock is also enabled in AEMIF driver (either present
> drivers/memory or from machine code for some older platforms).
> AEMIF timing must be initialized before NAND can be accessed.
> This ensures that AEMIF clock is enabled too.
>
> Remove the superfluous clock acquisition and enable in DaVinci
> NAND driver.
>
> Tested on K2L, K2HK, K2E, DA850 EVM, DA850 LCDK in device-tree
> boot and DM644x EVM in legacy boot.
>
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
> ---
> Hi Boris,
>
> If/when this patch gets accepted, it will nice to put this on
> an immutable branch others can merge. There is potential cleanup
> in drivers/clock and in DaVinci machine code that will depend
> on this.
>
> Thanks,
> Sekhar
>
>  drivers/mtd/nand/raw/davinci_nand.c | 25 +------------------------
>  1 file changed, 1 insertion(+), 24 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
> index 0f09518d980f..7255a0d94374 100644
> --- a/drivers/mtd/nand/raw/davinci_nand.c
> +++ b/drivers/mtd/nand/raw/davinci_nand.c
> @@ -27,7 +27,6 @@
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/err.h>
> -#include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/mtd/rawnand.h>
>  #include <linux/mtd/partitions.h>
> @@ -55,7 +54,6 @@ struct davinci_nand_info {
>         struct nand_chip        chip;
>
>         struct device           *dev;
> -       struct clk              *clk;
>
>         bool                    is_readmode;
>
> @@ -703,22 +701,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
>         /* Use board-specific ECC config */
>         info->chip.ecc.mode     = pdata->ecc_mode;
>
> -       ret = -EINVAL;
> -
> -       info->clk = devm_clk_get(&pdev->dev, "aemif");
> -       if (IS_ERR(info->clk)) {
> -               ret = PTR_ERR(info->clk);
> -               dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
> -               return ret;
> -       }
> -
> -       ret = clk_prepare_enable(info->clk);
> -       if (ret < 0) {
> -               dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
> -                       ret);
> -               goto err_clk_enable;
> -       }
> -
>         spin_lock_irq(&davinci_nand_lock);
>
>         /* put CSxNAND into NAND mode */
> @@ -732,7 +714,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
>         ret = nand_scan_ident(mtd, pdata->mask_chipsel ? 2 : 1, NULL);
>         if (ret < 0) {
>                 dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
> -               goto err;
> +               return ret;
>         }
>
>         switch (info->chip.ecc.mode) {
> @@ -838,9 +820,6 @@ static int nand_davinci_probe(struct platform_device *pdev)
>         nand_cleanup(&info->chip);
>
>  err:
> -       clk_disable_unprepare(info->clk);
> -
> -err_clk_enable:
>         spin_lock_irq(&davinci_nand_lock);
>         if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
>                 ecc4_busy = false;
> @@ -859,8 +838,6 @@ static int nand_davinci_remove(struct platform_device *pdev)
>
>         nand_release(nand_to_mtd(&info->chip));
>
> -       clk_disable_unprepare(info->clk);
> -
>         return 0;
>  }
>
> --
> 2.16.2
>

Tested-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>



More information about the linux-arm-kernel mailing list