[PATCH V4 5/6] ARM: dts: imx6sx-sabreauto: add wdog external reset support

[Anson Huang]

i.MX6SX Sabre Auto board has GPIO1_IO13 pin can be
MUXed as WDOG output to reset PMIC, add this function
support.

Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
---
no changes.
 arch/arm/boot/dts/imx6sx-sabreauto.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index fdc642f..ccf1cbb 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -230,6 +230,12 @@
 				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
 	};
 };
 
@@ -369,3 +375,9 @@
 		#gpio-cells = <2>;
 	};
 };
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
-- 
2.7.4