[PATCH 2/8] dt-bindings: stm32-dwmac: add support of MPU families
Christophe Roullier
christophe.roullier at st.com
Tue Apr 24 08:01:54 PDT 2018
Add description for Ethernet MPU families fields
Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
---
Documentation/devicetree/bindings/net/stm32-dwmac.txt | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index 489dbcb..e9d1c4a 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -6,14 +6,26 @@ Please see stmmac.txt for the other unchanged properties.
The device node has following properties.
Required properties:
-- compatible: Should be "st,stm32-dwmac" to select glue, and
+- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and
"snps,dwmac-3.50a" to select IP version.
+ For MPU family should be "st,stm32mp1-dwmac" to select
+ glue, and "snps,dwmac-4.20a" to select IP version.
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
+ For MPU family "ethstp" for power mode clock.
+ For MPU family need also "syscfg-clk" for SYSCFG clock.
+- interrupt-names: Should contain a list of interrupt names corresponding to
+ the interrupts in the interrupts property, if available.
- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register.
+ encompases the glue register, and the offset of the control register.
+
+Optional properties:
+- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
+- st,int-phyclk : valid only where PHY do not have quartz and need to be clock
+ by RCC
+
Example:
ethernet at 40028000 {
--
1.9.1
More information about the linux-arm-kernel
mailing list