[RESEND PATCH v6 11/27] drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
Jingoo Han
jingoohan1 at gmail.com
Tue Apr 24 06:57:01 PDT 2018
On Monday, April 23, 2018 6:50 AM, Enric Balletbo i Serra wrote:
>
> From: zain wang <wzz at rock-chips.com>
>
> There are some different bits between Rockchip and Exynos in register
> "AUX_PD". This patch fixes the incorrect operations about it.
>
> Cc: Douglas Anderson <dianders at chromium.org>
> Signed-off-by: zain wang <wzz at rock-chips.com>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> Signed-off-by: Thierry Escande <thierry.escande at collabora.com>
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Reviewed-by: Archit Taneja <architt at codeaurora.org>
Acked-by: Jingoo Han <jingoohan1 at gmail.com>
Best regards,
Jingoo Han
> ---
>
> .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 117 ++++++++++--------
> .../gpu/drm/bridge/analogix/analogix_dp_reg.h | 2 +
> 2 files changed, 65 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index bb72f8b0e603..dee1ba109b5f 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -248,76 +248,85 @@ void analogix_dp_set_analog_power_down(struct
> analogix_dp_device *dp,
> {
> u32 reg;
> u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
> + u32 mask;
>
> if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> phy_pd_addr = ANALOGIX_DP_PD;
>
> switch (block) {
> case AUX_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= AUX_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~AUX_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + mask = RK_AUX_PD;
> + else
> + mask = AUX_PD;
> +
> + reg = readl(dp->reg_base + phy_pd_addr);
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH0_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH0_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH0_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH0_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH1_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH1_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH1_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH1_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH2_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH2_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH2_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH2_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case CH3_BLOCK:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= CH3_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~CH3_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + mask = CH3_PD;
> + reg = readl(dp->reg_base + phy_pd_addr);
> +
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> + writel(reg, dp->reg_base + phy_pd_addr);
> break;
> case ANALOG_TOTAL:
> - if (enable) {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg |= DP_PHY_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - } else {
> - reg = readl(dp->reg_base + phy_pd_addr);
> - reg &= ~DP_PHY_PD;
> - writel(reg, dp->reg_base + phy_pd_addr);
> - }
> + /*
> + * There is no bit named DP_PHY_PD, so We used DP_INC_BG
> + * to power off everything instead of DP_PHY_PD in
> + * Rockchip
> + */
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + mask = DP_INC_BG;
> + else
> + mask = DP_PHY_PD;
> +
> + reg = readl(dp->reg_base + phy_pd_addr);
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> +
> + writel(reg, dp->reg_base + phy_pd_addr);
> + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
> + usleep_range(10, 15);
> break;
> case POWER_ALL:
> if (enable) {
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index 9602668669f4..b633a4a5082a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -345,7 +345,9 @@
> #define DP_INC_BG (0x1 << 7)
> #define DP_EXP_BG (0x1 << 6)
> #define DP_PHY_PD (0x1 << 5)
> +#define RK_AUX_PD (0x1 << 5)
> #define AUX_PD (0x1 << 4)
> +#define RK_PLL_PD (0x1 << 4)
> #define CH3_PD (0x1 << 3)
> #define CH2_PD (0x1 << 2)
> #define CH1_PD (0x1 << 1)
> --
> 2.17.0
More information about the linux-arm-kernel
mailing list