[PATCH V2 3/3] cpufreq: add suspend/resume support in Armada 37xx DVFS driver
Viresh Kumar
viresh.kumar at linaro.org
Mon Apr 23 23:07:36 PDT 2018
From: Miquel Raynal <miquel.raynal at bootlin.com>
Add suspend/resume hooks in Armada 37xx DVFS driver to handle S2RAM
operations. As there is currently no 'driver' structure, create one
to store both the regmap and the register values during suspend
operation.
A syscore_ops is used to export the suspend/resume hooks.
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
V1->V2:
- Updated patch based on cpufreq-dt suspend/resume hooks.
drivers/cpufreq/armada-37xx-cpufreq.c | 67 +++++++++++++++++++++++++++++++++--
1 file changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 9dafb3bbc334..c827d2437246 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -23,6 +23,8 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+#include "cpufreq-dt.h"
+
/* Power management in North Bridge register set */
#define ARMADA_37XX_NB_L0L1 0x18
#define ARMADA_37XX_NB_L2L3 0x1C
@@ -56,6 +58,16 @@
*/
#define LOAD_LEVEL_NR 4
+struct armada37xx_cpufreq_state {
+ struct regmap *regmap;
+ u32 nb_l0l1;
+ u32 nb_l2l3;
+ u32 nb_dyn_mod;
+ u32 nb_cpu_load;
+};
+
+static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
+
struct armada_37xx_dvfs {
u32 cpu_freq_max;
u8 divider[LOAD_LEVEL_NR];
@@ -136,7 +148,7 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
clk_set_parent(clk, parent);
}
-static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
mask = ARMADA_37XX_NB_DFS_EN;
@@ -162,8 +174,44 @@ static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
regmap_update_bits(base, reg, mask, mask);
}
+static int armada37xx_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+ struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+ regmap_read(state->regmap, ARMADA_37XX_NB_L0L1, &state->nb_l0l1);
+ regmap_read(state->regmap, ARMADA_37XX_NB_L2L3, &state->nb_l2l3);
+ regmap_read(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+ &state->nb_cpu_load);
+ regmap_read(state->regmap, ARMADA_37XX_NB_DYN_MOD, &state->nb_dyn_mod);
+
+ return 0;
+}
+
+static int armada37xx_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ struct armada37xx_cpufreq_state *state = armada37xx_cpufreq_state;
+
+ /* Ensure DVFS is disabled otherwise the following registers are RO */
+ armada37xx_cpufreq_disable_dvfs(state->regmap);
+
+ regmap_write(state->regmap, ARMADA_37XX_NB_L0L1, state->nb_l0l1);
+ regmap_write(state->regmap, ARMADA_37XX_NB_L2L3, state->nb_l2l3);
+ regmap_write(state->regmap, ARMADA_37XX_NB_CPU_LOAD,
+ state->nb_cpu_load);
+
+ /*
+ * NB_DYN_MOD register is the one that actually enable back DVFS if it
+ * was enabled before the suspend operation. This must be done last
+ * otherwise other registers are not writable.
+ */
+ regmap_write(state->regmap, ARMADA_37XX_NB_DYN_MOD, state->nb_dyn_mod);
+
+ return 0;
+}
+
static int __init armada37xx_cpufreq_driver_init(void)
{
+ struct cpufreq_dt_platform_data pdata;
struct armada_37xx_dvfs *dvfs;
struct platform_device *pdev;
unsigned long freq;
@@ -213,6 +261,15 @@ static int __init armada37xx_cpufreq_driver_init(void)
goto put_clk;
}
+ armada37xx_cpufreq_state = kmalloc(sizeof(*armada37xx_cpufreq_state),
+ GFP_KERNEL);
+ if (!armada37xx_cpufreq_state) {
+ ret = -ENOMEM;
+ goto put_clk;
+ }
+
+ armada37xx_cpufreq_state->regmap = nb_pm_base;
+
armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
clk_put(clk);
@@ -228,7 +285,11 @@ static int __init armada37xx_cpufreq_driver_init(void)
/* Now that everything is setup, enable the DVFS at hardware level */
armada37xx_cpufreq_enable_dvfs(nb_pm_base);
- pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ pdata.suspend = armada37xx_cpufreq_suspend;
+ pdata.resume = armada37xx_cpufreq_resume;
+
+ pdev = platform_device_register_data(NULL, "cpufreq-dt", -1, &pdata,
+ sizeof(pdata));
ret = PTR_ERR_OR_ZERO(pdev);
if (ret)
goto disable_dvfs;
@@ -243,6 +304,8 @@ static int __init armada37xx_cpufreq_driver_init(void)
freq = cur_frequency / dvfs->divider[load_lvl];
dev_pm_opp_remove(cpu_dev, freq);
}
+
+ kfree(armada37xx_cpufreq_state);
put_clk:
clk_put(clk);
return ret;
--
2.15.0.194.g9af6a3dea062
More information about the linux-arm-kernel
mailing list