[PATCH] ARM: tegra: fix ulpi regression on tegra20

[Marcel Ziswiler]

Hi Marc

On Fri, 2018-04-20 at 10:52 +0200, Marc Dietrich wrote:
> 
> ...
> I booted 4.17-rc1 (which includes this fix) on an AC100 (T20 paz00
> board) and 
> the error above is still there. Surprisingly the error vanishes when
> I revert 
> your patch. So this patch actually *causes* the problem above on my
> board.

That's really strange.

I believe I do have one of them paz00 boards laying around somewhere as
well. Just need to dig it out again and will give it a try. Looking at
their schematics at least reveals the exact same circuit as found on
all other T20 based boards using DAP_MCLK2 as REFCLK to the USB3315C
which BTW is 24 MHz and not 26 MHz as CDEV2 claims!

> Could it be, that we need all four clocks? Dimitry mentioned on IRC
> that it 
> could also be a problem in the clock init table. I don't have the
> technical 
> background myself to fix it, but I still wonder what could be so
> different 
> between TrimSlice and AC100.

I am wondering the same. However I still suspect that something is
completely wrong in that area as that CDEV2 clock is completely bogus.
It really does not exist!

> Marc

Cheers

Marcel