[PATCH v2] ARM: dts: qcom: Add apq8064 Dragon Board 600c support

[Loic Poulain]

Hi Srini,

On 16 March 2018 at 22:54,  <srinivas.kandagatla at linaro.org> wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>
> This patch add support to DB600c board, which is another
> 96boards based on Qualcomm APQ8064 SoC.
>
> Support for USB, HDMI, PCIe, I2C, SPI, eMMC, microSD card, LEDs
> device tree nodes is added in this patch.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> ---
> Changes since v1:
>         - added chosen node with stdout, suggested by Stephen Boyd
>         - removed spi flash node and gpio22 pinconf, as its not required in this patch.
>         - removed extra comment lines and fix a node name, spotted by Stephen Boyd.
>
>  arch/arm/boot/dts/Makefile                |   1 +
>  arch/arm/boot/dts/qcom-apq8064-db600c.dts | 530 ++++++++++++++++++++++++++++++
>  2 files changed, 531 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-apq8064-db600c.dts

> +
> +               gsbi at 16500000 {
> +                       status = "okay";
> +                       qcom,mode = <GSBI_PROT_UART_W_FC>;
> +                       serial at 1654000 {

Missing zero, should be serial at 16540000.

> +                               label = "BT-UART";
> +                               status = "okay";
> +                               pinctrl-name = "default";
> +                               pinctrl-0 = <&gsbi6_uart_4pins>;
> +                       };
> +               };

Regards,
Loic