[PATCH] arm64: msm8916: fix gic_irq_domain_translate warnings

[srinivas.kandagatla at linaro.org]

From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>

Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index cfbd72186762..5d66a575c7e1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -180,7 +180,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	thermal-zones {
@@ -513,7 +513,7 @@
 		blsp_i2c2: i2c at 78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -528,7 +528,7 @@
 		blsp_i2c4: i2c at 78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -543,7 +543,7 @@
 		blsp_i2c6: i2c at 78ba000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 0>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -575,7 +575,7 @@
 					"mi2s-bit-clk3";
 			#sound-dai-cells = <1>;
 
-			interrupts = <0 160 0>;
+			interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x07708000 0x10000>;
 			reg-names = "lpass-lpaif";
@@ -595,7 +595,7 @@
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -612,7 +612,7 @@
 			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -819,7 +819,7 @@
 			iommu-ctx at 2000 {
 				compatible = "qcom,msm-iommu-v1-ns";
 				reg = <0x2000 0x1000>;
-				interrupts = <GIC_SPI 242 0>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -864,7 +864,7 @@
 				      "bus_clk",
 				      "vsync_clk";
 
-			interrupts = <0 72 0>;
+			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
-- 
2.16.2