[PATCH 2/2] memory: aemif: add support for board files

Bartosz Golaszewski brgl at bgdev.pl
Wed Apr 18 08:35:52 PDT 2018


From: Bartosz Golaszewski <bgolaszewski at baylibre.com>

Currently aemif is supported in two places separately. By the platform
driver in drivers/memory and by a hand crafted driver in mach-davinci.

We want to drop the latter but also keep the legacy mode. Add support
for board files to the aemif driver.

The new structure in platform data currently only contains the chip
select number, since currently existing users don't require anything
else, but it can be extended in the future.

While extending the platform data struct, add kernel docs describing
its members.

Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
 drivers/memory/ti-aemif.c              | 58 +++++++++++++++++---------
 include/linux/platform_data/ti-aemif.h | 25 +++++++++++
 2 files changed, 63 insertions(+), 20 deletions(-)

diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c
index 588e58d40d1b..c9577fda967c 100644
--- a/drivers/memory/ti-aemif.c
+++ b/drivers/memory/ti-aemif.c
@@ -339,9 +339,6 @@ static int aemif_probe(struct platform_device *pdev)
 	struct aemif_platform_data *pdata;
 	struct of_dev_auxdata *dev_lookup;
 
-	if (np == NULL)
-		return 0;
-
 	aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
 	if (!aemif)
 		return -ENOMEM;
@@ -363,8 +360,10 @@ static int aemif_probe(struct platform_device *pdev)
 
 	aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
 
-	if (of_device_is_compatible(np, "ti,da850-aemif"))
+	if (np && of_device_is_compatible(np, "ti,da850-aemif"))
 		aemif->cs_offset = 2;
+	else if (pdata)
+		aemif->cs_offset = pdata->cs_offset;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	aemif->base = devm_ioremap_resource(dev, res);
@@ -373,15 +372,23 @@ static int aemif_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	/*
-	 * For every controller device node, there is a cs device node that
-	 * describe the bus configuration parameters. This functions iterate
-	 * over these nodes and update the cs data array.
-	 */
-	for_each_available_child_of_node(np, child_np) {
-		ret = of_aemif_parse_abus_config(pdev, child_np);
-		if (ret < 0)
-			goto error;
+	if (np) {
+		/*
+		 * For every controller device node, there is a cs device node
+		 * that describe the bus configuration parameters. This
+		 * functions iterate over these nodes and update the cs data
+		 * array.
+		 */
+		for_each_available_child_of_node(np, child_np) {
+			ret = of_aemif_parse_abus_config(pdev, child_np);
+			if (ret < 0)
+				goto error;
+		}
+	} else if (pdata && pdata->num_abus_data > 0) {
+		for (i = 0; i < pdata->num_abus_data; i++, aemif->num_cs++) {
+			aemif->cs_data[i].cs = pdata->abus_data->cs;
+			aemif_get_hw_params(pdev, i);
+		}
 	}
 
 	for (i = 0; i < aemif->num_cs; i++) {
@@ -394,14 +401,25 @@ static int aemif_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Create a child devices explicitly from here to
-	 * guarantee that the child will be probed after the AEMIF timing
-	 * parameters are set.
+	 * Create a child devices explicitly from here to guarantee that the
+	 * child will be probed after the AEMIF timing parameters are set.
 	 */
-	for_each_available_child_of_node(np, child_np) {
-		ret = of_platform_populate(child_np, NULL, dev_lookup, dev);
-		if (ret < 0)
-			goto error;
+	if (np) {
+		for_each_available_child_of_node(np, child_np) {
+			ret = of_platform_populate(child_np, NULL,
+						   dev_lookup, dev);
+			if (ret < 0)
+				goto error;
+		}
+	} else {
+		for (i = 0; i < pdata->num_sub_devices; i++) {
+			pdata->sub_devices[i].dev.parent = dev;
+			ret = platform_device_register(&pdata->sub_devices[i]);
+			if (ret) {
+				dev_warn(dev, "Error register sub device %s\n",
+					 pdata->sub_devices[i].name);
+			}
+		}
 	}
 
 	return 0;
diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h
index ac72e115093c..e6407bafcbf8 100644
--- a/include/linux/platform_data/ti-aemif.h
+++ b/include/linux/platform_data/ti-aemif.h
@@ -16,8 +16,33 @@
 
 #include <linux/of_platform.h>
 
+/**
+ * struct aemif_abus_data - Async bus configuration parameters.
+ *
+ * @cs - Chip-select number.
+ */
+struct aemif_abus_data {
+	u32 cs;
+};
+
+/**
+ * struct aemif_platform_data - Data to set up the TI aemif driver.
+ *
+ * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif
+ *              subdevices.
+ * @cs_offset: Lowest allowed chip-select number.
+ * @abus_data: Array of async bus configuration entries.
+ * @num_abus_data: Number of abus entries.
+ * @sub_devices: Array of platform subdevices.
+ * @num_sub_devices: Number of subdevices.
+ */
 struct aemif_platform_data {
 	struct of_dev_auxdata *dev_lookup;
+	u32 cs_offset;
+	struct aemif_abus_data *abus_data;
+	size_t num_abus_data;
+	struct platform_device *sub_devices;
+	size_t num_sub_devices;
 };
 
 #endif /* __TI_DAVINCI_AEMIF_DATA_H__ */
-- 
2.17.0




More information about the linux-arm-kernel mailing list