[PATCH v4 0/6] clocksource: rework Atmel TCB timer driver

Alexandre Belloni alexandre.belloni at bootlin.com
Wed Apr 18 03:51:37 PDT 2018


Hi,

This series gets back on the TCB drivers rework. It introduces a new driver to
handle the clocksource and clockevent devices.

As a reminder, this is necessary because:
 - the current tcb_clksrc driver is probed too late to be able to be used at
   boot and we now have SoCs that don't have a PIT. They currently are not able
   to boot a mainline kernel.
 - using the PIT doesn't work well with preempt-rt because its interrupt is
   shared (in particular with the UART and their interrupt flags are
   incompatible)
 - the current solution is wasting some TCB channels

The plan is to get this driver upstream, then convert the TCB PWM driver to be
able to get rid of the tcb_clksrc driver along with atmel_tclib.

Changes in v4:
 - rebased on top of v4.17-rc1
 - fixed an issue when setting max_delta for clockevents_config_and_register

Alexandre Belloni (6):
  ARM: at91: add TCB registers definitions
  clocksource/drivers: Add a new driver for the Atmel ARM TC blocks
  clocksource/drivers: atmel-pit: make option silent
  ARM: at91: Implement clocksource selection
  ARM: configs: at91: use new TCB timer driver
  ARM: configs: at91: unselect PIT

 arch/arm/configs/at91_dt_defconfig    |   2 +-
 arch/arm/configs/sama5_defconfig      |   2 +-
 arch/arm/mach-at91/Kconfig            |  25 ++
 drivers/clocksource/Kconfig           |  13 +-
 drivers/clocksource/Makefile          |   3 +-
 drivers/clocksource/timer-atmel-tcb.c | 608 ++++++++++++++++++++++++++
 include/soc/at91/atmel_tcb.h          | 216 +++++++++
 7 files changed, 865 insertions(+), 4 deletions(-)
 create mode 100644 drivers/clocksource/timer-atmel-tcb.c
 create mode 100644 include/soc/at91/atmel_tcb.h

-- 
2.17.0




More information about the linux-arm-kernel mailing list