[v5,08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data

Sven Eckelmann sven.eckelmann at openmesh.com
Tue Apr 17 23:59:40 PDT 2018


On Freitag, 23. März 2018 15:48:51 CEST Sricharan R wrote:
> Add the common data for all dk07 based boards.
> 
> Reviewed-by: Abhishek Sahu <absahu at codeaurora.org>
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
> ---
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 69 +++++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

The no-map reserved-memory for tz and smem are missing. Linux doesn't have 
control over these regions and they are placed in the middle of the ram before 
Linux even starts. And u-boot is also not adding these ranges automatically.

    	reserved-memory {
    		#address-cells = <0x1>;
    		#size-cells = <0x1>;
    		ranges;
    
    		smem at 87e00000 {
    			reg = <0x87e00000 0x080000>;
    			no-map;
    		};
    
    		tz at 87e80000 {
    			reg = <0x87e80000 0x180000>;
    			no-map;
    		};
    	};

This can either (depending on HW/SW configuration) lead to a failed boot [1] 
or to runtime crashes like:

    root at OpenWrt:/# /tmp/memory-allocator-test
    main 0
    [  571.758058] Unhandled fault: imprecise external abort (0xc06) at 0x01715ff8
    [  571.758099] pgd = cebec000
    [  571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f
    Bus error

I would not know how to disable QSEE on these boards and thus would assume 
that it should be part of this dtsi.

Kind regards,
	Sven

[1] https://www.spinics.net/lists/linux-arm-msm/msg21536.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180418/90b854f2/attachment.sig>


More information about the linux-arm-kernel mailing list