[PATCH] ARM: dts: Fix NAS4220B pin config

[Roman Yeryomin]

On 2018-04-17 11:53, Linus Walleij wrote:
> The DTS file for the NAS4220B had the pin config for the
> ethernet interface set to the pins in the SL3512 SoC while
> this system is using SL3516. Fix it by referencing the
> right SL3516 pins instead of the SL3512 pins.
> 
> Cc: stable at vger.kernel.org
> Cc: Hans Ulli Kroll <ulli.kroll at googlemail.com>
> Reported-by: Andreas Fiedler <andreas.fiedler at gmx.net>
> Reported-by: Roman Yeryomin <roman at advem.lv>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> Hi ARM SoC folks: if this gets a Tested-by or similar from
> someone with the NAS4220B please apply it directly to
> the ARM SoC tree for fixes.
> ---
>  arch/arm/boot/dts/gemini-nas4220b.dts | 28 
> ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts
> b/arch/arm/boot/dts/gemini-nas4220b.dts
> index 8bbb6f85d161..4785fbcc41ed 100644
> --- a/arch/arm/boot/dts/gemini-nas4220b.dts
> +++ b/arch/arm/boot/dts/gemini-nas4220b.dts
> @@ -134,37 +134,37 @@
>  						function = "gmii";
>  						groups = "gmii_gmac0_grp";
>  					};
> -					/* Settings come from OpenWRT */
> +					/* Settings come from OpenWRT, pins on SL3516 */
>  					conf0 {
> -						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
> +						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
>  						skew-delay = <0>;
>  					};
>  					conf1 {
> -						pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC";
> +						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
>  						skew-delay = <15>;
>  					};
>  					conf2 {
> -						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
> +						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
>  						skew-delay = <7>;
>  					};
>  					conf3 {
> -						pins = "V7 GMAC0 TXC";
> +						pins = "U8 GMAC0 TXC";
>  						skew-delay = <11>;
>  					};
>  					conf4 {
> -						pins = "P10 GMAC1 TXC";
> +						pins = "V11 GMAC1 TXC";
>  						skew-delay = <10>;
>  					};
>  					conf5 {
>  						/* The data lines all have default skew */
> -						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
> -						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
> -						       "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
> -						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3",
> -						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
> -						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
> -						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
> -						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
> +						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
> +						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
> +						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
> +						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
> +						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
> +						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
> +						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
> +						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
>  						skew-delay = <7>;
>  					};
>  					/* Set up drive strength on GMAC0 to 16 mA */

Tested-by: Roman Yeryomin <roman at advem.lv>