[PATCH v5 2/7] clk: meson: aoclk: refactor common code into dedicated file
Yixun Lan
yixun.lan at amlogic.com
Tue Apr 17 01:17:59 PDT 2018
Hi jerome
On 04/16/18 19:34, Jerome Brunet wrote:
> On Mon, 2018-04-09 at 22:37 +0800, Yixun Lan wrote:
>> We try to refactor the common code into one dedicated file,
>> while preparing to add new Meson-AXG aoclk driver, this would
>> help us to better share the code by all aoclk drivers.
>>
>> Suggested-by: Jerome Brunet <jbrunet at baylibre.com>
>> Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
>> ---
>> drivers/clk/meson/Kconfig | 7 ++++
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/gxbb-aoclk.c | 91 ++++++++++++++---------------------------
>> drivers/clk/meson/gxbb-aoclk.h | 7 ++++
>> drivers/clk/meson/meson-aoclk.c | 82 +++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/meson-aoclk.h | 35 ++++++++++++++++
>> 6 files changed, 163 insertions(+), 60 deletions(-)
>> create mode 100644 drivers/clk/meson/meson-aoclk.c
>> create mode 100644 drivers/clk/meson/meson-aoclk.h
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index d5cbec522aec..fddc7ec7b820 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
>> depends on OF
>> depends on ARCH_MESON || COMPILE_TEST
>>
>> +config COMMON_CLK_MESON_AO
>> + bool
>> + depends on OF
>> + depends on ARCH_MESON || COMPILE_TEST
>> + select COMMON_CLK_REGMAP_MESON
>> +
>> config COMMON_CLK_REGMAP_MESON
>> bool
>> select REGMAP
>> @@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
>> bool
>> depends on COMMON_CLK_AMLOGIC
>> select RESET_CONTROLLER
>> + select COMMON_CLK_MESON_AO
>> select COMMON_CLK_REGMAP_MESON
>> select MFD_SYSCON
>> help
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index ffee82e60b7a..0a8df284f4e7 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -3,6 +3,7 @@
>> #
>>
>> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
>> +obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
>> obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
>> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
>> index eebb580b9e0f..f2e0640a7f74 100644
>> --- a/drivers/clk/meson/gxbb-aoclk.c
>> +++ b/drivers/clk/meson/gxbb-aoclk.c
>> @@ -52,39 +52,13 @@
>> * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> */
>> -#include <linux/clk-provider.h>
>> -#include <linux/of_address.h>
>> #include <linux/platform_device.h>
>
>> #include <linux/reset-controller.h>
> Not required anymore
>
will remove
>> #include <linux/mfd/syscon.h>
>> -#include <linux/regmap.h>
>> #include <linux/init.h>
> Not required
>
will remove
>> -#include <linux/delay.h>
>
>> -#include <dt-bindings/clock/gxbb-aoclkc.h>
>> -#include <dt-bindings/reset/gxbb-aoclkc.h>
> Please keep these 2 here
>
see comments below
>> #include "clk-regmap.h"
>> #include "gxbb-aoclk.h"
>>
>> -struct gxbb_aoclk_reset_controller {
>> - struct reset_controller_dev reset;
>> - unsigned int *data;
>> - struct regmap *regmap;
>> -};
>> -
>> -static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
>> - unsigned long id)
>> -{
>> - struct gxbb_aoclk_reset_controller *reset =
>> - container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
>> -
>> - return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
>> - BIT(reset->data[id]));
>> -}
>> -
>> -static const struct reset_control_ops gxbb_aoclk_reset_ops = {
>> - .reset = gxbb_aoclk_do_reset,
>> -};
>> -
>> #define GXBB_AO_GATE(_name, _bit) \
>> static struct clk_regmap _name##_ao = { \
>> .data = &(struct clk_regmap_gate_data) { \
>> @@ -117,7 +91,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
>> },
>> };
>>
>> -static unsigned int gxbb_aoclk_reset[] = {
>> +static const unsigned int gxbb_aoclk_reset[] = {
>> [RESET_AO_REMOTE] = 16,
>> [RESET_AO_I2C_MASTER] = 18,
>> [RESET_AO_I2C_SLAVE] = 19,
>> @@ -135,7 +109,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
>> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
>> };
>>
>> -static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
>> +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
>> .hws = {
>> [CLKID_AO_REMOTE] = &remote_ao.hw,
>> [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
>> @@ -145,58 +119,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
>> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
>> [CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
>> },
>> - .num = 7,
>> + .num = NR_CLKS,
>> };
>>
>> -static int gxbb_aoclkc_probe(struct platform_device *pdev)
>> +static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
>> {
>> - struct gxbb_aoclk_reset_controller *rstc;
>> struct device *dev = &pdev->dev;
>> struct regmap *regmap;
>> - int ret, clkid;
>> -
>> - rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
>> - if (!rstc)
>> - return -ENOMEM;
>> + int ret;
>>
>> regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
>> if (IS_ERR(regmap)) {
>> dev_err(dev, "failed to get regmap\n");
>> - return -ENODEV;
>> - }
>> -
>> - /* Reset Controller */
>> - rstc->regmap = regmap;
>> - rstc->data = gxbb_aoclk_reset;
>> - rstc->reset.ops = &gxbb_aoclk_reset_ops;
>> - rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
>> - rstc->reset.of_node = dev->of_node;
>> - ret = devm_reset_controller_register(dev, &rstc->reset);
>> -
>> - /*
>> - * Populate regmap and register all clks
>> - */
>> - for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
>> - gxbb_aoclk_gate[clkid]->map = regmap;
>> -
>> - ret = devm_clk_hw_register(dev,
>> - gxbb_aoclk_onecell_data.hws[clkid]);
>> - if (ret)
>> - return ret;
>> + return PTR_ERR(regmap);
>> }
>>
>> /* Specific clocks */
>> cec_32k_ao.regmap = regmap;
>> ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
>> + if (ret) {
>> + dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct meson_aoclk_data gxbb_aoclkc_data = {
>> + .reset_reg = AO_RTI_GEN_CNTL_REG0,
>> + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset),
>> + .reset = gxbb_aoclk_reset,
>> + .num_clks = ARRAY_SIZE(gxbb_aoclk_gate),
>> + .clks = gxbb_aoclk_gate,
>> + .hw_data = &gxbb_aoclk_onecell_data,
>> +};
>> +
>> +static int gxbb_aoclkc_probe(struct platform_device *pdev)
>> +{
>> + int ret = gxbb_register_cec_ao_32k(pdev);
>> if (ret)
>> return ret;
>>
>> - return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>> - &gxbb_aoclk_onecell_data);
>> + return meson_aoclkc_probe(pdev);
>> }
>>
>> static const struct of_device_id gxbb_aoclkc_match_table[] = {
>> - { .compatible = "amlogic,meson-gx-aoclkc" },
>> + {
>> + .compatible = "amlogic,meson-gx-aoclkc",
>> + .data = &gxbb_aoclkc_data,
>> + },
>> { }
>> };
>>
>> diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
>> index badc4c22b4ee..b031f1a0213e 100644
>> --- a/drivers/clk/meson/gxbb-aoclk.h
>> +++ b/drivers/clk/meson/gxbb-aoclk.h
>> @@ -8,6 +8,10 @@
>> #ifndef __GXBB_AOCLKC_H
>> #define __GXBB_AOCLKC_H
>>
>> +#include "meson-aoclk.h"
>
> You are not using any of the structure defined in meson-aoclk.h in here.
> Why do you include this here ?
>
my initial intention was trying to avoid inlcude it in gxbb-aoclk.c
I could move to gxbb-aoclk.c if you prefer?
>> +
>> +#define NR_CLKS 7
>> +
>> /* AO Configuration Clock registers offsets */
>> #define AO_RTI_PWR_CNTL_REG1 0x0c
>> #define AO_RTI_PWR_CNTL_REG0 0x10
>> @@ -26,4 +30,7 @@ struct aoclk_cec_32k {
>>
>> extern const struct clk_ops meson_aoclk_cec_32k_ops;
>>
>> +#include <dt-bindings/clock/gxbb-aoclkc.h>
>> +#include <dt-bindings/reset/gxbb-aoclkc.h>
> Please drop this.
>
according to your last comment[1], you suggested to put these files
here? and I thought it was a good idea..
or do you think it's kind of messy if we put too many private files into
the C file (which has similar functionality and can be squashed together
?) ..
[1] https://lkml.kernel.org/r/1518449571.2883.30.camel@baylibre.com
> +#include <dt-bindings/clock/axg-aoclkc.h>
> +#include <dt-bindings/reset/axg-aoclkc.h>
I think those should be included in the same fashion as axg.h, gxbb.h and
meson8.h ... which is at the end of the private header.
>> +
>> #endif /* __GXBB_AOCLKC_H */
>> diff --git a/drivers/clk/meson/meson-aoclk.c b/drivers/clk/meson/meson-aoclk.c
>> new file mode 100644
>> index 000000000000..74338ef0a62b
>> --- /dev/null
>> +++ b/drivers/clk/meson/meson-aoclk.c
>> @@ -0,0 +1,82 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Amlogic Meson-AXG Clock Controller Driver
>> + *
>> + * Copyright (c) 2016 BayLibre, SAS.
>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
>> + * Author: Yixun Lan <yixun.lan at amlogic.com>
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/init.h>
> Not required
>
will drop it
>> +#include <linux/of_device.h>
>> +#include "clk-regmap.h"
>> +#include "meson-aoclk.h"
>> +
>> +static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + struct meson_aoclk_reset_controller *rstc =
>> + container_of(rcdev, struct meson_aoclk_reset_controller, reset);
>> +
>> + return regmap_write(rstc->regmap, rstc->data->reset_reg,
>> + BIT(rstc->data->reset[id]));
>> +}
>> +
>> +static const struct reset_control_ops meson_aoclk_reset_ops = {
>> + .reset = meson_aoclk_do_reset,
>> +};
>> +
>> +int meson_aoclkc_probe(struct platform_device *pdev)
>> +{
>> + struct meson_aoclk_reset_controller *rstc;
>> + struct meson_aoclk_data *data;
>> + struct device *dev = &pdev->dev;
>> + struct regmap *regmap;
>> + int ret, clkid;
>> +
>> + data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
>> + if (!data)
>> + return -ENODEV;
>> +
>> + rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
>> + if (!rstc)
>> + return -ENOMEM;
>> +
>> + regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
>> + if (IS_ERR(regmap)) {
>> + dev_err(dev, "failed to get regmap\n");
>> + return PTR_ERR(regmap);
>> + }
>> +
>> + /* Reset Controller */
>> + rstc->data = data;
>> + rstc->regmap = regmap;
>> + rstc->reset.ops = &meson_aoclk_reset_ops;
>> + rstc->reset.nr_resets = data->num_reset,
>> + rstc->reset.of_node = dev->of_node;
>> + ret = devm_reset_controller_register(dev, &rstc->reset);
>> + if (ret) {
>> + dev_err(dev, "failed to register reset controller\n");
>> + return ret;
>> + }
>> +
>> + /*
>> + * Populate regmap and register all clks
>> + */
>> + for (clkid = 0; clkid < data->num_clks; clkid++) {
>> + data->clks[clkid]->map = regmap;
>> +
>> + ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>> + (void *) data->hw_data);
>> +}
>> diff --git a/drivers/clk/meson/meson-aoclk.h b/drivers/clk/meson/meson-aoclk.h
>> new file mode 100644
>> index 000000000000..ec59e027dd37
>> --- /dev/null
>> +++ b/drivers/clk/meson/meson-aoclk.h
>> @@ -0,0 +1,35 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2017 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Qiufang Dai <qiufang.dai at amlogic.com>
>> + * Author: Yixun Lan <yixun.lan at amlogic.com>
>> + */
>> +
>> +#ifndef __MESON_AOCLK_H__
>> +#define __MESON_AOCLK_H__
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include "clk-regmap.h"
>> +
>> +struct meson_aoclk_data {
>> + const unsigned int reset_reg;
>> + const int num_reset;
>> + const unsigned int *reset;
>> + int num_clks;
>> + struct clk_regmap **clks;
>> + const struct clk_hw_onecell_data *hw_data;
>> +};
>> +
>> +struct meson_aoclk_reset_controller {
>> + struct reset_controller_dev reset;
>> + const struct meson_aoclk_data *data;
>> + struct regmap *regmap;
>> +};
>> +
>> +int meson_aoclkc_probe(struct platform_device *pdev);
>> +#endif
>> +
>
> .
>
More information about the linux-arm-kernel
mailing list