[PATCH v3 01/10] Documentations: dt-bindings: Add documents of generic PECI bus, adapter and client drivers
Jae Hyun Yoo
jae.hyun.yoo at linux.intel.com
Mon Apr 16 16:06:16 PDT 2018
Hi Rob,
Thanks for sharing your time. Please see my answers inline.
On 4/16/2018 10:59 AM, Rob Herring wrote:
> On Tue, Apr 10, 2018 at 11:32:03AM -0700, Jae Hyun Yoo wrote:
>> This commit adds documents of generic PECI bus, adapter and client drivers.
>
> "dt-bindings: ..." for the subject prefix please.
>
Sure, I'll change the subject.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
>> Reviewed-by: Haiyue Wang <haiyue.wang at linux.intel.com>
>> Reviewed-by: James Feist <james.feist at linux.intel.com>
>> Reviewed-by: Vernon Mauery <vernon.mauery at linux.intel.com>
>> Cc: Alan Cox <alan at linux.intel.com>
>> Cc: Andrew Jeffery <andrew at aj.id.au>
>> Cc: Andrew Lunn <andrew at lunn.ch>
>> Cc: Andy Shevchenko <andriy.shevchenko at intel.com>
>> Cc: Arnd Bergmann <arnd at arndb.de>
>> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>> Cc: Fengguang Wu <fengguang.wu at intel.com>
>> Cc: Greg KH <gregkh at linuxfoundation.org>
>> Cc: Guenter Roeck <linux at roeck-us.net>
>> Cc: Jason M Biils <jason.m.bills at linux.intel.com>
>> Cc: Jean Delvare <jdelvare at suse.com>
>> Cc: Joel Stanley <joel at jms.id.au>
>> Cc: Julia Cartwright <juliac at eso.teric.us>
>> Cc: Miguel Ojeda <miguel.ojeda.sandonis at gmail.com>
>> Cc: Milton Miller II <miltonm at us.ibm.com>
>> Cc: Pavel Machek <pavel at ucw.cz>
>> Cc: Randy Dunlap <rdunlap at infradead.org>
>> Cc: Stef van Os <stef.van.os at prodrive-technologies.com>
>> Cc: Sumeet R Pawnikar <sumeet.r.pawnikar at intel.com>
>> ---
>> .../devicetree/bindings/peci/peci-adapter.txt | 23 ++++++++++++++++++++
>> .../devicetree/bindings/peci/peci-bus.txt | 15 +++++++++++++
>> .../devicetree/bindings/peci/peci-client.txt | 25 ++++++++++++++++++++++
>
> This should be all one document.
>
Okay. I'll combine them into one document.
>> 3 files changed, 63 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/peci/peci-adapter.txt
>> create mode 100644 Documentation/devicetree/bindings/peci/peci-bus.txt
>> create mode 100644 Documentation/devicetree/bindings/peci/peci-client.txt
>>
>> diff --git a/Documentation/devicetree/bindings/peci/peci-adapter.txt b/Documentation/devicetree/bindings/peci/peci-adapter.txt
>> new file mode 100644
>> index 000000000000..9221374f6b11
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci-adapter.txt
>> @@ -0,0 +1,23 @@
>> +Generic device tree configuration for PECI adapters.
>> +
>> +Required properties:
>> +- compatible : Should contain hardware specific definition strings that can
>> + match an adapter driver implementation.
>> +- reg : Should contain PECI controller registers location and length.
>
> No need for these 2 here.
>
Will drop these 2.
>> +- #address-cells : Should be <1>.
>> +- #size-cells : Should be <0>.
>
> Some details on the addressing for PECI would be good.
>
It is for the PECI client address. Will add details.
>> +
>> +Example:
>> + peci: peci at 10000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10000000 0x1000>;
>> +
>
> This part of the example is not relevant. Just start with the adapter
> node.
>
Will remove that part. Thanks!
>> + peci0: peci-bus at 0 {
>> + compatible = "soc,soc-peci";
>> + reg = <0x0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/peci/peci-bus.txt b/Documentation/devicetree/bindings/peci/peci-bus.txt
>> new file mode 100644
>> index 000000000000..90bcc791ccb0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci-bus.txt
>> @@ -0,0 +1,15 @@
>> +Generic device tree configuration for PECI buses.
>> +
>> +Required properties:
>> +- compatible : Should be "simple-bus".
>
> I don't understand what this has to do with PECI? "simple-bus" already
> has a defined meaning.
>
Maybe I'm wrong but I intended to show this node is an umbrella node of
a PECI bus subsystem. What should I use then?
>> +- #address-cells : Should be <1>.
>> +- #size-cells : Should be <1>.
>> +- ranges : Should contain PECI controller registers ranges.
>> +
>> +Example:
>> + peci: peci at 10000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10000000 0x1000>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/peci/peci-client.txt b/Documentation/devicetree/bindings/peci/peci-client.txt
>> new file mode 100644
>> index 000000000000..8e2bfd8532f6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci-client.txt
>> @@ -0,0 +1,25 @@
>> +Generic device tree configuration for PECI clients.
>> +
>> +Required properties:
>> +- compatible : Should contain target device specific definition strings that can
>> + match a client driver implementation.
>
> Bindings are for h/w, not client drivers.
>
> How are PECI devices defined?
>
Got it. I'll correct the description. PECI client device is Intel CPU
which is connected through a PECI bus.
>> +- reg : Should contain address of a client CPU. Address range of CPU
>> + clients is starting from 0x30 based on PECI specification.
>> + <0x30> .. <0x37> (depends on the PECI_OFFSET_MAX definition)
>
> 8 devices should be enough for anyone...
>
> Where is PECI_OFFSET_MAX defined?
>
PECI_OFFSET_MAX is defined in include/linux/peci.h based on the maximum
CPU numbers of the current IA generation. I'll remove the unnecessary
details. A setting out of range would be handled accordingly in kernel.
>> +
>> +Example:
>> + peci-bus at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + < more properties >
>> +
>> + function at cpu0 {
>
> Not a valid node name. "function at 30" is what it probably should be. For
> a new bus you can define unit-address format you like, but it must be
> based on the contents of reg. However, it doesn't look like you should
> create anything special here.
>
Got it. I'll fix these node name like function at 30 and function at 31.
Thanks a lot for your comments!
-Jae
>> + compatible = "device,function";
>> + reg = <0x30>;
>> + };
>> +
>> + function at cpu1 {
>> + compatible = "device,function";
>> + reg = <0x31>;
>> + };
>> + };
>> --
>> 2.16.2
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list