[PATCH v7 26/26] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916

[Ulf Hansson]

From: Lina Iyer <lina.iyer at linaro.org>

In the hierarchical layout, we are creating power domains around each CPU
and describes the idle states for them inside the power domain provider
node.  Note that, the CPU's idle states still needs to be compatible with
"arm,idle-state".

Furthermore, represent the CPU cluster as a separate master power domain,
powering the CPU's power domains. The cluster node, contains the idle
states for the cluster and each idle state needs to be compatible with the
"domain-idle-state".

If the running platform is using a PSCI FW that supports the OS initiated
CPU suspend mode, which likely should be the case unless the PSCI FW is
very old, this change makes the PSCI driver to enable it.

Cc: Andy Gross <andy.gross at linaro.org>
Cc: David Brown <david.brown at linaro.org>
Cc: Lina Iyer <ilina at codeaurora.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
Co-developed-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 53 ++++++++++++++++++++++++++++++++---
 1 file changed, 49 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 66b318e..aff4b91 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -113,10 +113,10 @@
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
 		};
 
 		CPU1: cpu at 1 {
@@ -125,10 +125,10 @@
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
 		};
 
 		CPU2: cpu at 2 {
@@ -137,10 +137,10 @@
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
 		};
 
 		CPU3: cpu at 3 {
@@ -149,10 +149,10 @@
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
 			clocks = <&apcs 0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
 		};
 
 		L2_0: l2-cache {
@@ -169,12 +169,57 @@
 				min-residency-us = <2000>;
 				local-timer-stop;
 			};
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x1000010>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x1000030>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
 		};
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
 	};
 
 	pmu {
-- 
2.7.4