[PATCH] pinctrl/samsung: Correct EINTG banks order

[Krzysztof Kozlowski]

On Wed, Apr 11, 2018 at 10:36 AM, Tomasz Figa <tomasz.figa at gmail.com> wrote:
> 2018-04-10 17:38 GMT+09:00 Tomasz Figa <tomasz.figa at gmail.com>:
>> 2018-04-10 16:06 GMT+09:00 Krzysztof Kozlowski <krzk at kernel.org>:
>>> On Sun, Apr 8, 2018 at 8:07 PM, Paweł Chmiel
>>> <pawel.mikolaj.chmiel at gmail.com> wrote:
>>>> All banks with GPIO interrupts should be at beginning
>>>> of bank array and without any other types of banks between them.
>>>> This order is expected by exynos_eint_gpio_irq, when doing
>>>> interrupt group to bank translation.
>>>> Otherwise, kernel NULL pointer dereference would happen
>>>> when trying to handle interrupt, due to wrong bank being looked up.
>>>> Observed on s5pv210, when trying to handle gpj0 interrupt,
>>>> where kernel was mapping it to gpi bank.
>>>
>>> Thanks for the patch. The issue looks real although one thing was
>>> missed - there is a gap in SVC group between GPK2 and GPL0 (pointed by
>>> Marek Szyprowski):
>>>
>>> 0x0 - EINT_23 - gpk0
>>> 0x1 - EINT_24 - gpk1
>>> 0x2 - EINT_25 - gpk2
>>> 0x4 - EINT_27 - gpl0
>>> 0x7 - EINT_8 - gpm0
>>>
>>> Maybe this should be done differently - to remove such hidden
>>> requirement entirely in favor of another parameter of
>>> EXYNOS_PIN_BANK_EINTG argument?
>>
>> Perhaps let's limit this patch to s5pv210 and Exynos5410 alone, where
>> a simple swap of bank order in the arrays should be okay.
>>
>> We might also need to have some fixes on 4x12, because I noticed that
>> in exynos4x12_pin_banks0[] there is a hole in eint_offsets between
>> gpd1 and gpf0 and exynos4x12_pin_banks1[] starts with gpk0 that has
>> eint_offset equal to 0x08 (not 0).
>
> To close the loop, after talking offline and checking the
> documentation, Exynos4x12 is fine, because the group numbers in SVC
> register actually match what is defined in bank arrays.

Great! Thanks for checking.

Best regards,
Krzysztof