[PATCH v2 05/12] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg)
sean.wang at mediatek.com
sean.wang at mediatek.com
Wed Apr 11 01:53:58 PDT 2018
From: Sean Wang <sean.wang at mediatek.com>
Fix below a lot of Warnings (unit_address_vs_reg) that dtc complains so
much for
Node /oscillator at 1 has a unit name, but no reg property
Node /oscillator at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/cir at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/i2c at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/i2c at 1 has a unit name, but no reg property
Node /pinctrl at 10005000/i2s at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/i2s at 1 has a unit name, but no reg property
Node /pinctrl at 10005000/keys at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/leds at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/pwm at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/spi at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/uart at 0 has a unit name, but no reg property
Node /pinctrl at 10005000/uart at 1 has a unit name, but no reg property
Node /pinctrl at 10005000/uart at 2 has a unit name, but no reg property
Node /ethernet at 1b100000/mdio-bus/switch at 0/ports has a reg or ranges
property, but no unit name
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: devicetree at vger.kernel.org
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++--
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 27 ++++++++++++---------------
arch/arm/boot/dts/mt7623n-rfb.dtsi | 2 +-
3 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 406a9f3..b9b5619 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -124,14 +124,14 @@
#clock-cells = <0>;
};
- rtc32k: oscillator at 1 {
+ rtc32k: oscillator-1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "rtc32k";
};
- clk26m: oscillator at 0 {
+ clk26m: oscillator-0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index d2a354e..71023a6 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -145,8 +145,6 @@
switch at 0 {
compatible = "mediatek,mt7530";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
@@ -155,7 +153,6 @@
ports {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
port at 0 {
reg = <0>;
@@ -259,14 +256,14 @@
};
&pio {
- cir_pins_a:cir at 0 {
+ cir_pins_a:cir-default {
pins-cir {
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
bias-disable;
};
};
- i2c0_pins_a: i2c at 0 {
+ i2c0_pins_a: i2c0-default {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
@@ -274,7 +271,7 @@
};
};
- i2c1_pins_a: i2c at 1 {
+ i2c1_pins_a: i2c1-default {
pin-i2c1 {
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
@@ -282,7 +279,7 @@
};
};
- i2s0_pins_a: i2s at 0 {
+ i2s0_pins_a: i2s0-default {
pin-i2s0 {
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
@@ -294,7 +291,7 @@
};
};
- i2s1_pins_a: i2s at 1 {
+ i2s1_pins_a: i2s1-default {
pin-i2s1 {
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
@@ -306,7 +303,7 @@
};
};
- key_pins_a: keys at 0 {
+ key_pins_a: keys-alt {
pins-keys {
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
@@ -314,7 +311,7 @@
};
};
- led_pins_a: leds at 0 {
+ led_pins_a: leds-alt {
pins-leds {
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
@@ -433,7 +430,7 @@
};
};
- pwm_pins_a: pwm at 0 {
+ pwm_pins_a: pwm-default {
pins-pwm {
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
@@ -443,7 +440,7 @@
};
};
- spi0_pins_a: spi at 0 {
+ spi0_pins_a: spi0-default {
pins-spi {
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
@@ -453,21 +450,21 @@
};
};
- uart0_pins_a: uart at 0 {
+ uart0_pins_a: uart0-default {
pins-dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
};
};
- uart1_pins_a: uart at 1 {
+ uart1_pins_a: uart1-default {
pins-dat {
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
};
};
- uart2_pins_a: uart at 2 {
+ uart2_pins_a: uart2-default {
pins-dat {
pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
<MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 343e8ef..5c5cc7d 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -44,7 +44,7 @@
reg = <0 0x80000000 0 0x40000000>;
};
- usb_p1_vbus: regulator at 0 {
+ usb_p1_vbus: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
--
2.7.4
More information about the linux-arm-kernel
mailing list