[PATCH v3 2/8] DT: reset: renesas,rzn1-reboot: document RZ/N1 reboot driver

[Rob Herring]

On Thu, Mar 29, 2018 at 08:46:58AM +0100, Michel Pollet wrote:
> The Renesas RZ/N1 Family (Part #R9A06G0xx) requires a driver
> as part of the sysctrl MFD to handle rebooting the CA7 cores.
> This documents the driver bindings.
> 
> Signed-off-by: Michel Pollet <michel.pollet at bp.renesas.com>
> ---
>  .../bindings/power/renesas,rzn1-reboot.txt           | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt b/Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt
> new file mode 100644
> index 0000000..f592769
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt
> @@ -0,0 +1,20 @@
> +DT bindings for the Renesas RZ/N1 Reboot Driver
> +
> +== Reboot Driver Node ==
> +
> +The reboot driver is always a subnode of the system controller node, see
> +renesas,rzn1-sysctrl.txt for details.
> +
> +Bindings:
> ++ Required:
> +	compatible = "renesas,rzn1-reboot";
> +
> +Example:
> +	sysctrl: sysctrl at 4000c000 {
> +		compatible = "renesas,rzn1-sysctrl", "syscon", "simple-mfd";

Are there other functions for this block? If so, please define a 
complete binding for the block.

> +		reg = <0x4000c000 0x1000>;
> +
> +		reboot {
> +			compatible = "renesas,rzn1-reboot";

Why is this node needed? The driver for "renesas,rzn1-sysctrl" should 
be able to register as a reboot handler/driver/provider.

Rob