[PATCH 02/10] locking/qspinlock: Remove unbounded cmpxchg loop from locking slowpath

[Paul E. McKenney]

On Fri, Apr 06, 2018 at 04:50:19PM -0400, Waiman Long wrote:
> On 04/05/2018 12:58 PM, Will Deacon wrote:
> > The qspinlock locking slowpath utilises a "pending" bit as a simple form
> > of an embedded test-and-set lock that can avoid the overhead of explicit
> > queuing in cases where the lock is held but uncontended. This bit is
> > managed using a cmpxchg loop which tries to transition the uncontended
> > lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1).
> >
> > Unfortunately, the cmpxchg loop is unbounded and lockers can be starved
> > indefinitely if the lock word is seen to oscillate between unlocked
> > (0,0,0) and locked (0,0,1). This could happen if concurrent lockers are
> > able to take the lock in the cmpxchg loop without queuing and pass it
> > around amongst themselves.
> >
> > This patch fixes the problem by unconditionally setting _Q_PENDING_VAL
> > using atomic_fetch_or, and then inspecting the old value to see whether
> > we need to spin on the current lock owner, or whether we now effectively
> > hold the lock. The tricky scenario is when concurrent lockers end up
> > queuing on the lock and the lock becomes available, causing us to see
> > a lockword of (n,0,0). With pending now set, simply queuing could lead
> > to deadlock as the head of the queue may not have observed the pending
> > flag being cleared. Conversely, if the head of the queue did observe
> > pending being cleared, then it could transition the lock from (n,0,0) ->
> > (0,0,1) meaning that any attempt to "undo" our setting of the pending
> > bit could race with a concurrent locker trying to set it.
> >
> > We handle this race by preserving the pending bit when taking the lock
> > after reaching the head of the queue and leaving the tail entry intact
> > if we saw pending set, because we know that the tail is going to be
> > updated shortly.
> >
> > Cc: Peter Zijlstra <peterz at infradead.org>
> > Cc: Ingo Molnar <mingo at kernel.org>
> > Signed-off-by: Will Deacon <will.deacon at arm.com>
> > ---
> 
> The pending bit was added to the qspinlock design to counter performance
> degradation compared with ticket lock for workloads with light
> spinlock contention. I run my spinlock stress test on a Intel Skylake
> server running the vanilla 4.16 kernel vs a patched kernel with this
> patchset. The locking rates with different number of locking threads
> were as follows:
> 
>   # of threads  4.16 kernel     patched 4.16 kernel
>   ------------  -----------     -------------------
>         1       7,417 kop/s         7,408 kop/s
>         2       5,755 kop/s         4,486 kop/s
>         3       4,214 kop/s         4,169 kop/s
>         4       4,396 kop/s         4,383 kop/s
>        
> The 2 contending threads case is the one that exercise the pending bit
> code path the most. So it is obvious that this is the one that is most
> impacted by this patchset. The differences in the other cases are mostly
> noise or maybe just a little bit on the 3 contending threads case.
> 
> I am not against this patch, but we certainly need to find out a way to
> bring the performance number up closer to what it is before applying
> the patch.

It would indeed be good to not be in the position of having to trade off
forward-progress guarantees against performance, but that does appear to
be where we are at the moment.

							Thanx, Paul