[PATCH v4 6/6] PCI: aardvark: Remove PCIe outbound window configuration

Thomas Petazzoni thomas.petazzoni at bootlin.com
Fri Apr 6 07:55:36 PDT 2018


From: Evan Wang <xswang at marvell.com>

Outbound window is used to translate CPU space addresses to PCIe space
addresses when the CPU initiates PCIe transactions.

According to the suggestion of the HW designers, the recommended
solution is to use the default outbound parameters, even though the
current outbound window setting does not cause any known functional
issue.

This patch doesn't address any known functional issue, but aligns to
HW design guidelines, and removes code that isn't needed.

Signed-off-by: Evan Wang <xswang at marvell.com>
Reviewed-by: Victor Gu <xigu at marvell.com>
Reviewed-by: Nadav Haklai <nadavh at marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
---
 drivers/pci/host/pci-aardvark.c | 55 -----------------------------------------
 1 file changed, 55 deletions(-)

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 69c4fd50947e..702160c4ae09 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -109,24 +109,6 @@
 #define PCIE_MSI_MASK_REG			(CONTROL_BASE_ADDR + 0x5C)
 #define PCIE_MSI_PAYLOAD_REG			(CONTROL_BASE_ADDR + 0x9C)
 
-/* PCIe window configuration */
-#define OB_WIN_BASE_ADDR			0x4c00
-#define OB_WIN_BLOCK_SIZE			0x20
-#define OB_WIN_REG_ADDR(win, offset)		(OB_WIN_BASE_ADDR + \
-						 OB_WIN_BLOCK_SIZE * (win) + \
-						 (offset))
-#define OB_WIN_MATCH_LS(win)			OB_WIN_REG_ADDR(win, 0x00)
-#define OB_WIN_MATCH_MS(win)			OB_WIN_REG_ADDR(win, 0x04)
-#define OB_WIN_REMAP_LS(win)			OB_WIN_REG_ADDR(win, 0x08)
-#define OB_WIN_REMAP_MS(win)			OB_WIN_REG_ADDR(win, 0x0c)
-#define OB_WIN_MASK_LS(win)			OB_WIN_REG_ADDR(win, 0x10)
-#define OB_WIN_MASK_MS(win)			OB_WIN_REG_ADDR(win, 0x14)
-#define OB_WIN_ACTIONS(win)			OB_WIN_REG_ADDR(win, 0x18)
-
-/* PCIe window types */
-#define OB_PCIE_MEM				0x0
-#define OB_PCIE_IO				0x4
-
 /* LMI registers base address and register offsets */
 #define LMI_BASE_ADDR				0x6000
 #define CFG_REG					(LMI_BASE_ADDR + 0x0)
@@ -245,34 +227,9 @@ static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
 	return -ETIMEDOUT;
 }
 
-/*
- * Set PCIe address window register which could be used for memory
- * mapping.
- */
-static void advk_pcie_set_ob_win(struct advk_pcie *pcie,
-				 u32 win_num, u32 match_ms,
-				 u32 match_ls, u32 mask_ms,
-				 u32 mask_ls, u32 remap_ms,
-				 u32 remap_ls, u32 action)
-{
-	advk_writel(pcie, match_ls, OB_WIN_MATCH_LS(win_num));
-	advk_writel(pcie, match_ms, OB_WIN_MATCH_MS(win_num));
-	advk_writel(pcie, mask_ms, OB_WIN_MASK_MS(win_num));
-	advk_writel(pcie, mask_ls, OB_WIN_MASK_LS(win_num));
-	advk_writel(pcie, remap_ms, OB_WIN_REMAP_MS(win_num));
-	advk_writel(pcie, remap_ls, OB_WIN_REMAP_LS(win_num));
-	advk_writel(pcie, action, OB_WIN_ACTIONS(win_num));
-	advk_writel(pcie, match_ls | BIT(0), OB_WIN_MATCH_LS(win_num));
-}
-
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
-	int i;
-
-	/* Point PCIe unit MBUS decode windows to DRAM space */
-	for (i = 0; i < 8; i++)
-		advk_pcie_set_ob_win(pcie, i, 0, 0, 0, 0, 0, 0, 0);
 
 	/* Set to Direct mode */
 	reg = advk_readl(pcie, CTRL_CONFIG_REG);
@@ -851,12 +808,6 @@ static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie)
 
 		switch (resource_type(res)) {
 		case IORESOURCE_IO:
-			advk_pcie_set_ob_win(pcie, 1,
-					     upper_32_bits(res->start),
-					     lower_32_bits(res->start),
-					     0,	0xF8000000, 0,
-					     lower_32_bits(res->start),
-					     OB_PCIE_IO);
 			err = pci_remap_iospace(res, iobase);
 			if (err) {
 				dev_warn(dev, "error %d: failed to map resource %pR\n",
@@ -865,12 +816,6 @@ static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie)
 			}
 			break;
 		case IORESOURCE_MEM:
-			advk_pcie_set_ob_win(pcie, 0,
-					     upper_32_bits(res->start),
-					     lower_32_bits(res->start),
-					     0x0, 0xF8000000, 0,
-					     lower_32_bits(res->start),
-					     (2 << 20) | OB_PCIE_MEM);
 			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
 			break;
 		case IORESOURCE_BUS:
-- 
2.14.3




More information about the linux-arm-kernel mailing list