[PATCH v8 25/42] ARM: davinci: dm644x: add new clock init using common clock framework

[Sekhar Nori]

On Wednesday 04 April 2018 12:17 PM, Sekhar Nori wrote:
> On Tuesday 03 April 2018 10:00 PM, David Lechner wrote:
>> On 04/03/2018 05:26 AM, Sekhar Nori wrote:
>>> On Friday 16 March 2018 08:22 AM, David Lechner wrote:
>>>> +static struct resource dm644x_pll1_resources[] = {
>>>> +    {
>>>> +        .start    = DAVINCI_PLL1_BASE,
>>>> +        .end    = DAVINCI_PLL1_BASE + SZ_4K - 1,
>>>
>>> The .end should be DAVINCI_PLL1_BASE + SZ_1K - 1, otherwise it prevents
>>> PLL2 from getting registered.
>>>
>>>> +        .flags    = IORESOURCE_MEM,
>>>> +    },
>>>> +};
>>>> +
>>>> +static struct platform_device dm644x_pll1_device = {
>>>> +    .name        = "dm644x-pll1",
>>>> +    .id        = -1,
>>>> +    .resource    = dm644x_pll1_resources,
>>>> +    .num_resources    = ARRAY_SIZE(dm644x_pll1_resources),
>>>> +};
>>>> +
>>>> +static struct resource dm644x_pll2_resources[] = {
>>>> +    {
>>>> +        .start    = DAVINCI_PLL2_BASE,
>>>> +        .end    = DAVINCI_PLL2_BASE + SZ_4K - 1,
>>>
>>> And this too should be fixed, else it prevents the PSC from getting
>>> registered.
>>>
>>>> +        .flags    = IORESOURCE_MEM,
>>>> +    },
>>>> +};
>>>
>>> With these fixed, I still had to enable 'clk_ignore_unused' on DM644x
>>> EVM to get to NFS boot. I think root of the problem is that pm_runtime()
>>> APIs are not working in the legacy boot mode.
>>>
>>> This can be seen even on the DA850 LCDK in legacy boot. pm_genpd_summary
>>> in debugfs shows all domains are off and there are no devices registered
>>> under the "da850-psc1: emac" domain. NFS mounting still works on the
>>> DA850 LCDK because clk_summary shows enable and prepare count of 4 for
>>> emac. Not sure how that's happening. But on DM644x EVM, the emac clock
>>> enable count is 0.
>>>
>>> Still looking at whats going wrong here. I am testing your v8 branch
>>> with clk-davinci branch from clk-next merged to get the fixes Stephen
>>> made.
>>>
>>
>> In legacy mode, genpd is not being used. I didn't see any mechanism for
> 
> Ah, I got stumped by the genpd related debug entries popping up.
> Probably something should be done to make sure they don't show up in
> legacy boot. And some comments to that effect in psc.c will help.
> 
>> genpd lookup without device tree. So, we are still relying on the
>> matching in arch/arm/mach-davinci/pm_domain.c.
> 
> This is fine. We just need legacy boot to keep working without regressions.
> 
>>
>> I suspect we need to fix the clock lookups in
>> drivers/clk/davinci/psc-dm644x.c.
>>
>> LPSC_CLKDEV2(emac_clkdev,        NULL,        "davinci_emac.1",
>>                     "fck",        "davinci_mdio.0");
>>
>> NULL might need to be changed to "fck" to be picked up by pm matching
>> and "davinci_emac.1" should be verified that it matches the actual EMAC
>> device name.
> 
> NULL con_id matches what we have for DA850 and also what we had for
> DM644x prior to CCF conversion. So, I did not really suspect that. The
> device name does match. I will check what else could be going on based
> on your input.

This issue is because emac platform device is getting registered really
early on dm644x even before the clocks are ready in postcore_initcall().

I will send a patch fixing that.

Thanks,
Sekhar