[PATCH v2] ARM: dts: tpc: Device tree description of the iMX6Q TPC board
Lukasz Majewski
lukma at denx.de
Wed Apr 4 00:48:26 PDT 2018
Hi Fabio,
Thanks for the feedback,
> Hi Lukasz,
>
> On Tue, Apr 3, 2018 at 1:59 PM, Lukasz Majewski <lukma at denx.de> wrote:
>
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > b/Documentation/devicetree/bindings/vendor-prefixes.txt index
> > ae850d6c0ad3..8ff7eadc8bef 100644 ---
> > a/Documentation/devicetree/bindings/vendor-prefixes.txt +++
> > b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -181,6
> > +181,7 @@ karo Ka-Ro electronics GmbH keithkoep Keith &
> > Koep GmbH keymile Keymile GmbH
> > khadas Khadas
> > +kiebackpeter Kieback & Peter GmbH
>
> This should be a separate patch.
Ok.
>
> > kinetic Kinetic Technologies
> > kingnovel Kingnovel Technology Co., Ltd.
> > kosagi Sutajio Ko-Usagi PTE Ltd.
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index ade7a38543dc..c148c4cf28f2 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -459,6 +459,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> > imx6q-icore-ofcap10.dtb \
> > imx6q-icore-ofcap12.dtb \
> > imx6q-icore-rqs.dtb \
> > + imx6q-kp-tpc.dtb \
> > imx6q-marsboard.dtb \
> > imx6q-mccmon6.dtb \
> > imx6q-nitrogen6x.dtb \
> > diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts
> > b/arch/arm/boot/dts/imx6q-kp-tpc.dts new file mode 100644
> > index 000000000000..b5646040b516
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
> > @@ -0,0 +1,23 @@
> > +/*
> > + * Copyright 2018
> > + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
> > + *
> > + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
> This line should be the first one and start with //
Ok.
>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx6q-kp.dtsi"
> > +
> > +/ {
> > + model = "Freescale i.MX6 Qwuad K+P TPC Board";
> > + compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
> > +
> > + memory: memory at 10000000 {
>
> Only memory at 10000000 is enough.
Ok.
>
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6q-kp.dtsi
> > @@ -0,0 +1,460 @@
> > +/*
> > + * Copyright 2018
> > + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
> > + *
> > + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>
> Same here.
>
> > + beeper {
> > + compatible = "pwm-beeper";
> > + pwms = <&pwm2 0 500000>; //2kHz
>
> No // style comments, please.
>
> > + lcd_panel: lcd-panel {
> > + compatible = "auo,g070vvn01";
>
> I don't see this compatible string in linux-next.
I've sent support for this display yesterday.
[PATCH] display: panel: Add AUO g070vvn01 display support (800x480)
>
> > +&i2c1 {
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1>;
> > + status = "okay";
> > +
> > + goodix_ts at 5d {
> > + compatible = "goodix,gt911";
> > + reg = <0x5d>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_ts>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> > + irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> > + reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> > + };
> > +
> > + rx8025 at 32 {
> > + compatible = "dallas,rx8025";
>
> I don't see this compatible string in linux-next.
Ach... it should be "dallas,ds1307" as it supports also this chip. I
will fix it in v2.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180404/f292cb17/attachment.sig>
More information about the linux-arm-kernel
mailing list