[alsa-devel] [PATCH] ASoC: atmel_ssc_dai: fix spelling mistake: "Stoping" -> "Stopping"
Joe Perches
joe at perches.com
Tue Apr 3 08:49:57 PDT 2018
On Tue, 2018-04-03 at 15:45 +0200, Ladislav Michl wrote:
> On Fri, Mar 30, 2018 at 04:44:20PM +0100, Colin King wrote:
> > From: Colin Ian King <colin.king at canonical.com>
>
> Hello Colin,
>
> > Trivial fix to spelling mistake in pr_debug message text
>
> would you mind making this patch a bit less non-trivial and
> change pr_debug to dev_dbg dropping Atmel_ssc_dai prefix?
Presumably, then all the pr_<foo> calls should be changed.
Something like:
---
sound/soc/atmel/atmel_ssc_dai.c | 38 ++++++++++++++++----------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index a1e2c5682dcd..594228156b2d 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -291,11 +291,10 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
int dir, dir_mask;
int ret;
- pr_debug("atmel_ssc_startup: SSC_SR=0x%x\n",
- ssc_readl(ssc_p->ssc->regs, SR));
+ dev_dbg(dai->dev, "SSC_SR=0x%x\n", ssc_readl(ssc_p->ssc->regs, SR));
/* Enable PMC peripheral clock for this SSC */
- pr_debug("atmel_ssc_dai: Starting clock\n");
+ dev_dbg(dai->dev, "Starting clock\n");
clk_enable(ssc_p->ssc->clk);
ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
@@ -385,7 +384,7 @@ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
spin_unlock_irq(&ssc_p->lock);
/* Shutdown the SSC clock. */
- pr_debug("atmel_ssc_dai: Stopping clock\n");
+ dev_dbg(dai->dev, "Stopping clock\n");
clk_disable(ssc_p->ssc->clk);
}
@@ -794,13 +793,12 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
break;
default:
- printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
- ssc_p->daifmt);
+ dev_warn(dai->dev, "unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
return -EINVAL;
}
- pr_debug("atmel_ssc_hw_params: "
- "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
- rcmr, rfmr, tcmr, tfmr);
+ dev_dbg(dai->dev, "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
if (!ssc_p->initialized) {
if (!ssc_p->ssc->pdata->use_dma) {
@@ -818,9 +816,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
ssc_p->name, ssc_p);
if (ret < 0) {
- printk(KERN_WARNING
- "atmel_ssc_dai: request_irq failure\n");
- pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ dev_warn(dai->dev, "request_irq failure\n");
+ dev_dbg(dai->dev, "Stopping clock\n");
clk_disable(ssc_p->ssc->clk);
return ret;
}
@@ -839,7 +836,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
- pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ dev_dbg(dai->dev, "SSC initialized\n");
return 0;
}
@@ -862,9 +859,9 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
- pr_debug("%s enabled SSC_SR=0x%08x\n",
- dir ? "receive" : "transmit",
- ssc_readl(ssc_p->ssc->regs, SR));
+ dev_dbg(dai->dev, "%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
return 0;
}
@@ -1050,21 +1047,18 @@ static void asoc_ssc_exit(struct device *dev)
int atmel_ssc_set_audio(int ssc_id)
{
struct ssc_device *ssc;
- int ret;
/* If we can grab the SSC briefly to parent the DAI device off it */
ssc = ssc_request(ssc_id);
if (IS_ERR(ssc)) {
pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
- PTR_ERR(ssc));
+ PTR_ERR(ssc));
return PTR_ERR(ssc);
- } else {
- ssc_info[ssc_id].ssc = ssc;
}
- ret = asoc_ssc_init(&ssc->pdev->dev);
+ ssc_info[ssc_id].ssc = ssc;
- return ret;
+ return asoc_ssc_init(&ssc->pdev->dev);
}
EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
More information about the linux-arm-kernel
mailing list