[PATCH] mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
Gregory CLEMENT
gregory.clement at free-electrons.com
Thu Sep 28 08:57:41 PDT 2017
Hi,
On jeu., sept. 28 2017, Gregory CLEMENT <gregory.clement at free-electrons.com> wrote:
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 2eec2e652c53..845575593b59 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -466,6 +466,7 @@ static int xenon_probe(struct platform_device *pdev)
> {
> struct sdhci_pltfm_host *pltfm_host;
> struct sdhci_host *host;
> + struct xenon_priv *priv;
> int err;
>
> host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
> @@ -474,6 +475,7 @@ static int xenon_probe(struct platform_device *pdev)
> return PTR_ERR(host);
>
> pltfm_host = sdhci_priv(host);
> + priv = sdhci_pltfm_priv(pltfm_host);
>
> /*
> * Link Xenon specific mmc_host_ops function,
> @@ -491,9 +493,20 @@ static int xenon_probe(struct platform_device *pdev)
> if (err)
> goto free_pltfm;
>
> + priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
> + if (IS_ERR(priv->axi_clk)) {
> + err = PTR_ERR(priv->axi_clk);
> + dev_err(&pdev->dev, "Failed to setup axi clk: %d\n", err);
I should manage the -EPROBE_DEFER case here. So a v2 of this patch is
coming soon.
Sorry to not have seen this before sending the patch.
Gregory
> + priv->axi_clk = NULL;
> + } else {
> + err = clk_prepare_enable(priv->axi_clk);
> + if (err)
> + goto err_clk;
> + }
> +
> err = mmc_of_parse(host->mmc);
> if (err)
> - goto err_clk;
> + goto err_clk_axi;
>
> sdhci_get_of_property(pdev);
>
> @@ -502,11 +515,11 @@ static int xenon_probe(struct platform_device *pdev)
> /* Xenon specific dt parse */
> err = xenon_probe_dt(pdev);
> if (err)
> - goto err_clk;
> + goto err_clk_axi;
>
> err = xenon_sdhc_prepare(host);
> if (err)
> - goto err_clk;
> + goto err_clk_axi;
>
> pm_runtime_get_noresume(&pdev->dev);
> pm_runtime_set_active(&pdev->dev);
> @@ -527,6 +540,9 @@ static int xenon_probe(struct platform_device *pdev)
> pm_runtime_disable(&pdev->dev);
> pm_runtime_put_noidle(&pdev->dev);
> xenon_sdhc_unprepare(host);
> +err_clk_axi:
> + if (priv->axi_clk)
> + clk_disable_unprepare(priv->axi_clk);
> err_clk:
> clk_disable_unprepare(pltfm_host->clk);
> free_pltfm:
> @@ -538,6 +554,7 @@ static int xenon_remove(struct platform_device *pdev)
> {
> struct sdhci_host *host = platform_get_drvdata(pdev);
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>
> pm_runtime_get_sync(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> @@ -546,6 +563,8 @@ static int xenon_remove(struct platform_device *pdev)
> sdhci_remove_host(host, 0);
>
> xenon_sdhc_unprepare(host);
> + if (priv->axi_clk)
> + clk_disable_unprepare(priv->axi_clk);
>
> clk_disable_unprepare(pltfm_host->clk);
>
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> index 2bc0510c0769..9994995c7c56 100644
> --- a/drivers/mmc/host/sdhci-xenon.h
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -83,6 +83,7 @@ struct xenon_priv {
> unsigned char bus_width;
> unsigned char timing;
> unsigned int clock;
> + struct clk *axi_clk;
>
> int phy_type;
> /*
> --
> 2.14.1
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list