[PATCH v2 1/7] PCI: aardvark: fix logic in PCI configuration read/write functions

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Thu Sep 28 05:58:32 PDT 2017


From: Victor Gu <xigu at marvell.com>

The PCI configuration space read/write functions were special casing
the situation where PCI_SLOT(devfn) != 0, and returned
PCIBIOS_DEVICE_NOT_FOUND in this case.

However, will this is what is intended for the root bus, it is not
intended for the child busses, as it prevents discovering devices with
PCI_SLOT(x) != 0. Therefore, we return PCIBIOS_DEVICE_NOT_FOUND only
if we're on the root bus.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable at vger.kernel.org>
Signed-off-by: Victor Gu <xigu at marvell.com>
Reviewed-by: Wilson Ding <dingwei at marvell.com>
Reviewed-by: Nadav Haklai <nadavh at marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 drivers/pci/host/pci-aardvark.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 89f4e3d072d7..da2881ba7737 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -440,7 +440,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 	u32 reg;
 	int ret;
 
-	if (PCI_SLOT(devfn) != 0) {
+	if ((bus->number == pcie->root_bus_nr) && (PCI_SLOT(devfn) != 0)) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
@@ -494,7 +494,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	int offset;
 	int ret;
 
-	if (PCI_SLOT(devfn) != 0)
+	if ((bus->number == pcie->root_bus_nr) && (PCI_SLOT(devfn) != 0))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (where % size)
-- 
2.13.5




More information about the linux-arm-kernel mailing list