[PATCH v3 03/14] ARM: dts: sunxi: h3/h5: Fix node with unit name and no reg property
Corentin Labbe
clabbe.montjoie at gmail.com
Tue Sep 26 00:22:23 PDT 2017
This patch fix the warning "xxx has a unit name, but no reg property" by
removing "@0" from such node.
Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 289f2cd06dfe..2e4bae988acd 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -322,7 +322,7 @@
function = "i2c2";
};
- mmc0_pins_a: mmc0 at 0 {
+ mmc0_pins_a: mmc0 {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -330,13 +330,13 @@
bias-pull-up;
};
- mmc0_cd_pin: mmc0_cd_pin at 0 {
+ mmc0_cd_pin: mmc0_cd_pin {
pins = "PF6";
function = "gpio_in";
bias-pull-up;
};
- mmc1_pins_a: mmc1 at 0 {
+ mmc1_pins_a: mmc1 {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -354,7 +354,7 @@
bias-pull-up;
};
- spdif_tx_pins_a: spdif at 0 {
+ spdif_tx_pins_a: spdif {
pins = "PA17";
function = "spdif";
};
@@ -369,7 +369,7 @@
function = "spi1";
};
- uart0_pins_a: uart0 at 0 {
+ uart0_pins_a: uart0 {
pins = "PA4", "PA5";
function = "uart0";
};
@@ -697,7 +697,7 @@
interrupt-controller;
#interrupt-cells = <3>;
- ir_pins_a: ir at 0 {
+ ir_pins_a: ir {
pins = "PL11";
function = "s_cir_rx";
};
--
2.13.5
More information about the linux-arm-kernel
mailing list