[PATCH 06/10] ARM: dts: Add Broadcom Hurricane 2 DTS include file
Florian Fainelli
f.fainelli at gmail.com
Mon Sep 25 17:09:27 PDT 2017
Describe the Broadcom Hurricane 2 SoC comprised of a Cortex-A9 CPU
complex along with standard iProc peripherals:
* timers
* SPI controller
* NAND controller
* a single AMAC (Ethernet MAC controller)
* dual PCIe controllers
The design is largely similar to existing iProc-based SoCs such as
Northstar Plus.
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 368 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
new file mode 100644
index 000000000000..467181b9d609
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,hr2";
+ model = "Broadcom Hurricane 2 SoC";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ a9pll: arm_clk at 00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,hr2-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
+ };
+
+ timer at 20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-timer at 20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-watchdog at 20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller at 21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x0011c40c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial at 0300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart1: serial at 0400 {
+ compatible = "ns16550a";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ dma at 20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ status = "disabled";
+ };
+
+ amac0: ethernet at 22000 {
+ compatible = "brcm,nsp-amac";
+ reg = <0x022000 0x1000>,
+ <0x110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ nand: nand at 26000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x026000 0x600>,
+ <0x11b408 0x600>,
+ <0x026f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ gpiob: gpio at 30000 {
+ compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+ reg = <0x30000 0x50>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpios = <4>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm: pwm at 31000 {
+ compatible = "brcm,iproc-pwm";
+ reg = <0x31000 0x28>;
+ clocks = <&osc>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rng: rng at 33000 {
+ compatible = "brcm,bcm-nsp-rng";
+ reg = <0x33000 0x14>;
+ };
+
+ qspi: qspi at 27200 {
+ compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ reg = <0x027200 0x184>,
+ <0x027000 0x124>,
+ <0x11c408 0x004>,
+ <0x0273a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overhead",
+ "mspi_done",
+ "mspi_halted";
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* partitions defined in board DTS */
+ };
+
+ ccbtimer0: timer at 34000 {
+ compatible = "arm,sp804";
+ reg = <0x34000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ccbtimer1: timer at 35000 {
+ compatible = "arm,sp804";
+ reg = <0x35000 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c0: i2c at 38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+
+ watchdog at 39000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x39000 0x1000>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c1: i2c at 3b000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x3b000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+ };
+
+ pflash: nor at 20000000 {
+ compatible = "cfi-flash", "jedec-flash";
+ reg = <0x20000000 0x04000000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* partitions defined in board DTS */
+ };
+
+ pcie0: pcie at 18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+ status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi at 18012000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
+ <GIC_SPI 183 IRQ_TYPE_NONE>,
+ <GIC_SPI 184 IRQ_TYPE_NONE>,
+ <GIC_SPI 185 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
+ };
+
+ pcie1: pcie at 18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+ status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi at 18013000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
+ <GIC_SPI 189 IRQ_TYPE_NONE>,
+ <GIC_SPI 190 IRQ_TYPE_NONE>,
+ <GIC_SPI 191 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
+ };
+};
--
2.14.1
More information about the linux-arm-kernel
mailing list