[linux-sunxi] [PATCH 2/3] arm64: allwinner: a64: add CPU opp table

[Samuel Holland]

Hello,

On 09/22/17 19:15, Icenowy Zheng wrote:
> Add the operating table for the CPU (ARM cores) on Allwinner A64 SoC.
> 
> OPPs higher to 816MHz is temporarily dropped, to prevent overheat on
> boards with AXP803 support and undervoltage on boards without AXP803
> support.
> 
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> ---
>   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 20aba7b186aa..0532da4939eb 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -52,6 +52,23 @@
>   	#address-cells = <1>;
>   	#size-cells = <1>;
>   
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-648000000 {
> +			opp-hz = /bits/ 64 <648000000>;
> +			opp-microvolt = <1040000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +
> +		opp-816000000 {
> +			opp-hz = /bits/ 64 <816000000>;
> +			opp-microvolt = <1100000>;
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +		};
> +	};
> +
>   	cpus {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
> @@ -61,6 +78,10 @@
>   			device_type = "cpu";
>   			reg = <0>;
>   			enable-method = "psci";
> +			clocks = <&ccu CLK_CPUX>;
CLK_CPUX is not currently exposed in the dt-bindings header, so this
doesn't compile.

> +			clock-names = "cpu";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
>   		};
>   
>   		cpu1: cpu at 1 {
> @@ -68,6 +89,7 @@
>   			device_type = "cpu";
>   			reg = <1>;
>   			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
>   		};
>   
>   		cpu2: cpu at 2 {
> @@ -75,6 +97,7 @@
>   			device_type = "cpu";
>   			reg = <2>;
>   			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
>   		};
>   
>   		cpu3: cpu at 3 {
> @@ -82,6 +105,7 @@
>   			device_type = "cpu";
>   			reg = <3>;
>   			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
>   		};
>   	};
>   
> 

Thanks,
Samuel