[PATCH 1/3] ARM: debug-ll: Add support for r8a7745
Simon Horman
horms+renesas at verge.net.au
Mon Sep 25 00:54:42 PDT 2017
From: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
Enable low-level debugging support for RZ/G1E (r8a7745). RZ/G1E uses
SCIF4 for the debug console.
Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2 at renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/Kconfig.debug | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6dcea8e8e941..31bf312be7d5 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -911,6 +911,13 @@ choice
Say Y here if you want kernel low-level debugging support
via SCIF2 on Renesas R-Car E2 (R8A7794).
+ config DEBUG_RCAR_GEN2_SCIF4
+ bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+ depends on ARCH_R8A7745
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF4 on Renesas RZ/G1E (R8A7745).
+
config DEBUG_RMOBILE_SCIFA0
bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
depends on ARCH_R8A73A4
@@ -1451,6 +1458,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
@@ -1570,6 +1578,7 @@ config DEBUG_UART_PHYS
default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+ default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
@@ -1604,6 +1613,7 @@ config DEBUG_UART_PHYS
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+ DEBUG_RCAR_GEN2_SCIF4 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
--
2.1.4
More information about the linux-arm-kernel
mailing list