[PATCH 12/12] ARM: sun8i: a83t: Fix simple-bus unit address format error

[Corentin Labbe]

This patch remove leading 0 of unit address and so remove
lots of warning when building DT with W=1.

Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 7f99ef37f61f..dd6a393725c6 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -248,7 +248,7 @@
 			status = "disabled";
 		};
 
-		usb_otg: usb at 01c19000 {
+		usb_otg: usb at 1c19000 {
 			compatible = "allwinner,sun8i-a83t-musb",
 				     "allwinner,sun8i-a33-musb";
 			reg = <0x01c19000 0x0400>;
@@ -436,7 +436,7 @@
 			status = "disabled";
 		};
 
-		uart0: serial at 01c28000 {
+		uart0: serial at 1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -447,7 +447,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial at 01c28400 {
+		uart1: serial at 1c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.13.5