[PATCH v2 4/5] clk: aspeed: Register gated clocks

Joel Stanley joel at jms.id.au
Wed Sep 20 21:26:40 PDT 2017


The majority of the clocks in the system are gates paired with a reset
controller that holds the IP in reset.

This borrows from clk_hw_register_gate, but registers two 'gates', one
to control the clock enable register and the other to control the reset
IP. This allows us to enforce the ordering:

 1. Place IP in reset
 2. Enable clock
 3. Delay
 4. Release reset

There are some gates that do not have an associated reset; these are
handled by using -1 as the index for the reset.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 drivers/clk/clk-aspeed.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index 19531798e040..dec9db4ec47b 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -191,6 +191,108 @@ static struct clk_hw *aspeed_calc_pll(const char *name, u32 val)
 			mult, div);
 }
 
+static int aspeed_clk_enable(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	unsigned long flags;
+	u32 clk = BIT(gate->clock_idx);
+	u32 rst = BIT(gate->reset_idx);
+
+	spin_lock_irqsave(gate->lock, flags);
+
+	if (gate->reset_idx >= 0) {
+		/* Put IP in reset */
+		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
+
+		/* Delay 100us */
+		udelay(100);
+	}
+
+	/* Enable clock */
+	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0);
+
+	if (gate->reset_idx >= 0) {
+		/* Delay 10ms */
+		/* TODO: can we sleep here? */
+		msleep(10);
+
+		/* Take IP out of reset */
+		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
+	}
+
+	spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void aspeed_clk_disable(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	unsigned long flags;
+	u32 clk = BIT(gate->clock_idx);
+
+	spin_lock_irqsave(gate->lock, flags);
+
+	/* Disable clock */
+	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk);
+
+	spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int aspeed_clk_is_enabled(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	u32 clk = BIT(gate->clock_idx);
+	u32 reg;
+
+	regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
+
+	return (reg & clk) ? 0 : 1;
+}
+
+static const struct clk_ops aspeed_clk_gate_ops = {
+	.enable = aspeed_clk_enable,
+	.disable = aspeed_clk_disable,
+	.is_enabled = aspeed_clk_is_enabled,
+};
+
+static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
+		const char *name, const char *parent_name, unsigned long flags,
+		struct regmap *map, u8 clock_idx, u8 reset_idx,
+		u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct aspeed_clk_gate *gate;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &aspeed_clk_gate_ops;
+	init.flags = flags | CLK_IS_BASIC;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->map = map;
+	gate->clock_idx = clock_idx;
+	gate->reset_idx = reset_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
 static int __init aspeed_clk_probe(struct platform_device *pdev)
 {
 	const struct aspeed_clk_soc_data *soc_data;
@@ -200,6 +302,7 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
 	struct regmap *map;
 	struct clk_hw *hw;
 	u32 val, rate;
+	int i;
 
 	map = syscon_node_to_regmap(dev->of_node);
 	if (IS_ERR(map)) {
@@ -269,6 +372,31 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
 			&aspeed_clk_lock);
 	aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
 
+	/* There are a number of clocks that not included in this driver as
+	 * more information is required:
+	 *   D2-PLL
+	 *   D-PLL
+	 *   YCLK
+	 *   RGMII
+	 *   RMII
+	 *   UART[1..5] clock source mux
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
+		const struct aspeed_gate_data *gd;
+
+		gd = &aspeed_gates[i];
+		aspeed_clk_data->hws[ASPEED_CLK_GATES + i] =
+			aspeed_clk_hw_register_gate(NULL, gd->name,
+					     gd->parent_name,
+					     gd->flags,
+					     map,
+					     gd->clock_idx,
+					     gd->reset_idx,
+					     CLK_GATE_SET_TO_DISABLE,
+					     &aspeed_clk_lock);
+	}
+
 	return 0;
 };
 
-- 
2.14.1




More information about the linux-arm-kernel mailing list