[PATCH 08/10] ARM: dts: Add nodes for missing omap4 interconnect target modules
Tony Lindgren
tony at atomide.com
Wed Sep 20 15:46:19 PDT 2017
On omap4 we are missing dts nodes for several interconnect target
modules that we are idling on init. This currently works with the
legacy platform data still around.
To fix this, let's add the interconnect target modules so we can
idle the unused interconnect target module on init.
Also note that adding the interconnect target module node does not
necessarily mean that there is a driver available for the child IP
block, or that the child IP block is even functional.
In the SGX case, the PowerVR driver is closed source. And McASP on
omap4 has at least the TX path disabled and is not supported by the
davinci-mcasp driver. For AESS there is old Android 3.4 kernel
driver available but it's unlikely that anybody is going to update
it for the mainline kernel.
For smarflex, we are still probing with platform data and the
driver needs more work before we can add the device ip child nodes.
And finally, we're not yet using the interconnet ranges. I will
be posting separate patches for those later on.
Cc: Benoît Cousson <bcousson at baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Liam Girdwood <lgirdwood at gmail.com>
Cc: Mark Brown <broonie at kernel.org>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Mauro Carvalho Chehab <mchehab at kernel.org>
Cc: Nishanth Menon <nm at ti.com>
Cc: Matthijs van Duin <matthijsvanduin at gmail.com>
Cc: Paul Walmsley <paul at pwsan.com>
Cc: Peter Ujfalusi <peter.ujfalusi at ti.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sakari Ailus <sakari.ailus at iki.fi>
Cc: Tero Kristo <t-kristo at ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/boot/dts/omap4.dtsi | 179 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 167 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -392,6 +392,21 @@
#interrupt-cells = <2>;
};
+ target-module at 48076000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "slimbus2";
+ reg = <0x48076000 0x4>,
+ <0x48076010 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48076000 0x001000>;
+
+ /* No child device binding or driver in mainline */
+ };
+
elm: elm at 48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0x2000>;
@@ -452,25 +467,61 @@
clock-frequency = <48000000>;
};
- smartreflex_iva: smartreflex at 4a0db000 {
- compatible = "ti,omap4-smartreflex-iva";
- reg = <0x4a0db000 0x80>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ target-module at 4a0db000 {
+ compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_iva";
+ reg = <0x4a0db000 0x4>,
+ <0x4a0db008 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a0db000 0x001000>;
+
+ smartreflex_iva: smartreflex at 0 {
+ compatible = "ti,omap4-smartreflex-iva";
+ reg = <0 0x80>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- smartreflex_core: smartreflex at 4a0dd000 {
- compatible = "ti,omap4-smartreflex-core";
- reg = <0x4a0dd000 0x80>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ target-module at 4a0dd000 {
+ compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_core";
+ reg = <0x4a0dd000 0x4>,
+ <0x4a0dd008 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a0dd000 0x001000>;
+
+ smartreflex_core: smartreflex at 0 {
+ compatible = "ti,omap4-smartreflex-core";
+ reg = <0 0x80>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- smartreflex_mpu: smartreflex at 4a0d9000 {
- compatible = "ti,omap4-smartreflex-mpu";
- reg = <0x4a0d9000 0x80>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ target-module at 4a0d9000 {
+ compatible = "ti,sysc-sr";
ti,hwmods = "smartreflex_mpu";
+ reg = <0x4a0d9000 0x4>,
+ <0x4a0d9008 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a0d9000 0x001000>;
+
+ smartreflex_mpu: smartreflex at 0 {
+ compatible = "ti,omap4-smartreflex-mpu";
+ reg = <0 0x80>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
hwspinlock: spinlock at 4a0f6000 {
@@ -676,6 +727,21 @@
#iommu-cells = <0>;
};
+ target-module at 52000000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "iss";
+ reg = <0x52000000 0x4>,
+ <0x52000010 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x52000000 0x1000000>;
+
+ /* No child device binding, driver in staging */
+ };
+
mmu_ipu: mmu at 55082000 {
compatible = "ti,omap4-iommu";
reg = <0x55082000 0x100>;
@@ -770,6 +836,62 @@
status = "disabled";
};
+ target-module at 40128000 {
+ compatible = "ti,sysc-mcasp";
+ ti,hwmods = "mcasp";
+ reg = <0x40128004 0x4>;
+ reg-names = "sysc";
+ clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40128000 0x1000>, /* MPU */
+ <0x49028000 0x49028000 0x1000>; /* L3 */
+
+ /*
+ * Child device unsupported by davinci-mcasp. At least
+ * TX path is disabled for omap4, and only DIT mode
+ * works with no I2S. See also old Android kernel
+ * omap-mcasp driver for more information.
+ */
+ };
+
+ target-module at 4012c000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "slimbus1";
+ reg = <0x4012c000 0x4>,
+ <0x4012c010 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
+ <0x4902c000 0x4902c000 0x1000>; /* L3 */
+
+ /* No child device binding or driver in mainline */
+ };
+
+ target-module at 401f1000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "aess";
+ reg = <0x401f1000 0x4>,
+ <0x401f1010 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */
+ <0x490f1000 0x490f1000 0x1000>; /* L3 */
+
+ /*
+ * No child device binding or driver in mainline.
+ * See Android tree and related upstreaming efforts
+ * for the old driver.
+ */
+ };
+
mcbsp4: mcbsp at 48096000 {
compatible = "ti,omap4-mcbsp";
reg = <0x48096000 0xff>; /* L4 Interconnect */
@@ -858,6 +980,21 @@
};
};
+ target-module at 4a10a000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "fdif";
+ reg = <0x4a10a000 0x4>,
+ <0x4a10a010 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a10a000 0x1000>;
+
+ /* No child device binding or driver in mainline */
+ };
+
timer1: timer at 4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
@@ -1075,6 +1212,24 @@
status = "disabled";
};
+ target-module at 56000000 {
+ compatible = "ti,sysc-type2";
+ ti,hwmods = "gpu";
+ reg = <0x5601fc00 0x4>,
+ <0x5601fc10 0x4>;
+ reg-names = "rev", "sysc";
+ clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
+ clock-names = "clkctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+
dss: dss at 58000000 {
compatible = "ti,omap4-dss";
reg = <0x58000000 0x80>;
--
2.14.1
More information about the linux-arm-kernel
mailing list