[RFC RESEND 3/3] arm: dts: add Hi3521A dts
Rob Herring
robh at kernel.org
Wed Sep 20 13:53:03 PDT 2017
On Sun, Sep 17, 2017 at 03:23:27AM -0500, Marty E. Plummer wrote:
> Add hi3521a.dtsi and hi3521a-rs-dm290e.dts for RaySharp CCTV systems,
> marketed under the name Samsung SDR-B74301N
>
> Signed-off-by: Marty E. Plummer <hanetzer at startmail.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/hi3521a-rs-dm290e.dts | 52 ++++++
> arch/arm/boot/dts/hi3521a.dtsi | 310 ++++++++++++++++++++++++++++++++
> 3 files changed, 364 insertions(+)
> create mode 100644 arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> create mode 100644 arch/arm/boot/dts/hi3521a.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faf46abaa4a2..e7b9b5dde20f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -189,6 +189,8 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
> gemini-sq201.dtb \
> gemini-wbd111.dtb \
> gemini-wbd222.dtb
> +dtb-$(CONFIG_ARCH_HI3521A) += \
> + hi3521a-rs-dm290e.dtb
> dtb-$(CONFIG_ARCH_HI3xxx) += \
> hi3620-hi4511.dtb
> dtb-$(CONFIG_ARCH_HIGHBANK) += \
> diff --git a/arch/arm/boot/dts/hi3521a-rs-dm290e.dts b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> new file mode 100644
> index 000000000000..b32c8392c93f
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3521a-rs-dm290e.dts
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2017 Marty Plummer <hanetzer at startmail.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 3 of the License, or
> + * (at your option) any later version.
Should be version 2 or later? Doesn't really matter to me from a DT
perspective, but it is in the kernel tree.
You can use SPDX tags if you want.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/dts-v1/;
> +#include "hi3521a.dtsi"
> +
> +/ {
> + model = "RaySharp RS-DM-290E DVR Board";
> + compatible = "hisilicon,hi3521a";
Needs a board compatible too.
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + };
> +
> + memory {
Needs a unit-address.
> + device_type = "memory";
> + reg = <0x80000000 0xf00000>;
> + };
> +};
> +
> +&hi_sfc {
> + status = "okay";
> + spi-nor at 0 {
> + compatible = "jedec,spi-nor";
I don't remember offhand, but I think this should have a device specific
compatible too.
> + reg = <0>;
> + spi-max-frequency = <104000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&dual_timer0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/hi3521a.dtsi b/arch/arm/boot/dts/hi3521a.dtsi
> new file mode 100644
> index 000000000000..2af746fdec46
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3521a.dtsi
> @@ -0,0 +1,310 @@
> +/*
> + * Copyright (C) 2017 Marty Plummer <hanetzer at startmail.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 3 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <dt-bindings/clock/hi3521a-clock.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + chosen { };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0>;
> + };
> + };
> +
> + hi_sfc: spi-nor-controller at 10000000 {
> + compatible = "hisilicon,hi3521a-spi-nor", "hisilicon,fmc-spi-nor";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x10000000 0x10000>, <0x14000000 0x1000000>;
> + reg-names = "control", "memory";
> + clocks = <&crg HI3521A_FMC_CLK>;
> + status = "disabled";
> + };
> +
> + gic: interrupt-controller at 10300000 {
> + compatible = "arm,pl390";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
> + };
> +
> + clk_3m: clk_3m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <3000000>;
> + };
> +
> + crg: clock-reset-controller at 12040000 {
> + compatible = "hisilicon,hi3521a-crg";
> + #clock-cells = <1>;
> + #reset-cells = <2>;
> + reg = <0x12040000 0x10000>;
> + };
These memory mapped peripherals should be under a bus node.
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges;
It is preferred to have a value here and limit the range of the bus
addresses.
> +
> + dmac: dma at 10060000 {
dma-controller at ...
> + compatible = "arm,pl080", "arm,primecell";
> + reg = <0x10060000 0x1000>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
I wouldn't think enabling dma would be a per board decision.
> + };
> +
> + dual_timer0: timer at 12000000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x12000000 0x1000>;
> + clocks = <&clk_3m>;
> + clock-names = "apb_pclk";
IIRC, it is deprecated to have a single clock here. The h/w has 2 clock
inputs.
Where's the ARM architected timer?
> + status = "disabled";
> + };
> +
> + dual_timer1: timer at 12010000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x12010000 0x1000>;
> + clocks = <&clk_3m>;
> + clock-name = "apb_pclk";
> + status = "disabled";
> + };
> +
> + dual_timer2: timer at 12020000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x12020000 0x1000>;
> + clocks = <&clk_3m>;
> + clock-name = "apb_pclk";
> + status = "disabled";
> + };
> +
> + dual_timer3: timer at 12030000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x12030000 0x1000>;
> + clocks = <&clk_3m>;
> + clock-name = "apb_pclk";
> + status = "disabled";
> + };
> +
> + wdt0: watchdog at 12070000 {
> + compatible = "arm,sp805", "arm,primecell";
> + arm,primecell-periphid = <0x00141805>;
> + reg = <0x12070000 0x1000>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_3m>;
> + clock-names = "apb_pclk";
> + };
> +
> + uart0: serial at 12080000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12080000 0x1000>;
> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HI3521A_UART0_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + uart1: serial at 12090000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12090000 0x1000>;
> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HI3521A_UART1_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + uart2: serial at 120a0000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x120a0000 0x1000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg HI3521A_UART2_CLK>;
> + clock-names = "apb_pclk";
> + status = "disabled";
> + };
> +
> + gpio0: gpio at 12150000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12150000 0x1000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio1: gpio at 12160000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12160000 0x1000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio2: gpio at 12170000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12170000 0x1000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio3: gpio at 12180000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12180000 0x1000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio4: gpio at 12190000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12190000 0x1000>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio5: gpio at 121a0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121a0000 0x1000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio6: gpio at 121b0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121b0000 0x1000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio7: gpio at 121c0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121c0000 0x1000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio8: gpio at 121d0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121d0000 0x1000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio9: gpio at 121e0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121e0000 0x1000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio10: gpio at 121f0000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x121f0000 0x1000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio11: gpio at 12200000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12200000 0x1000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio12: gpio at 12210000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12210000 0x1000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> +
> + gpio13: gpio at 12220000 {
> + compatible = "arm,pl061", "arm,primecell";
> + reg = <0x12220000 0x1000>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.14.1
>
More information about the linux-arm-kernel
mailing list