[PATCH] pinctrl: single: make two arrays static const, reduces object code size

[Tony Lindgren]

* Colin King <colin.king at canonical.com> [170919 07:43]:
> From: Colin Ian King <colin.king at canonical.com>
> 
> Don't populate the read-only arrays prop2 and prop4 on the stack, instead
> make them static const.  Makes the object code smaller by over 230 bytes:
> 
> Before:
>    text	   data	    bss	    dec	    hex	filename
>   28235	   5820	    192	  34247	   85c7	drivers/pinctrl/pinctrl-single.o
> 
> After:
>    text	   data	    bss	    dec	    hex	filename
>   27839	   5980	    192	  34011	   84db	drivers/pinctrl/pinctrl-single.o
> 
> Signed-off-by: Colin Ian King <colin.king at canonical.com>

Acked-by: Tony Lindgren <tony at atomide.com>

> ---
>  drivers/pinctrl/pinctrl-single.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> index b8b3d932cd73..e6cd8de793e2 100644
> --- a/drivers/pinctrl/pinctrl-single.c
> +++ b/drivers/pinctrl/pinctrl-single.c
> @@ -873,13 +873,13 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
>  	int i = 0, nconfs = 0;
>  	unsigned long *settings = NULL, *s = NULL;
>  	struct pcs_conf_vals *conf = NULL;
> -	struct pcs_conf_type prop2[] = {
> +	static const struct pcs_conf_type prop2[] = {
>  		{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
>  		{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
>  		{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
>  		{ "pinctrl-single,low-power-mode", PIN_CONFIG_LOW_POWER_MODE, },
>  	};
> -	struct pcs_conf_type prop4[] = {
> +	static const struct pcs_conf_type prop4[] = {
>  		{ "pinctrl-single,bias-pullup", PIN_CONFIG_BIAS_PULL_UP, },
>  		{ "pinctrl-single,bias-pulldown", PIN_CONFIG_BIAS_PULL_DOWN, },
>  		{ "pinctrl-single,input-schmitt-enable",
> -- 
> 2.14.1
>