[PATCH 9/9] arm64: dts: marvell: 8040-db: enable the SFP ports

[Antoine Tenart]

This patch enables the SFP ports on the Armada 8040 DB as these ports
are now supported by the PPv2 driver (since the PHY is now optional).

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
Tested-by: Marcin Wojtas <mw at semihalf.com>
---
 arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 0d7b2ae46610..26a018329a74 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -200,6 +200,11 @@
 	status = "okay";
 };
 
+&cpm_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+};
+
 &cpm_eth2 {
 	status = "okay";
 	phy = <&phy1>;
@@ -244,6 +249,11 @@
 	status = "okay";
 };
 
+&cps_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+};
+
 &cps_eth1 {
 	status = "okay";
 	phy = <&phy0>;
-- 
2.13.5