[PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds

[York Sun]

On 07/27/2017 03:05 AM, yinbo.zhu at nxp.com wrote:
> From: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> 
> Add USB EHCI support for ls1012aqds platform
> 
> Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> Signed-off-by: yinbo.zhu <yinbo.zhu at nxp.com>
> ---
>   arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
>   include/configs/ls1012aqds.h                           | 2 ++
>   include/usb/ehci-ci.h                                  | 2 +-
>   3 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> index 8ad199f..4afc338 100644
> --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> @@ -35,6 +35,7 @@
>   #define CONFIG_SYS_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
>   #define CONFIG_SYS_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
>   #define CONFIG_SYS_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
> +#define CONFIG_SYS_EHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x07600000)
>   #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
>   #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
>   #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
> index 5b8500b..55f2578 100644
> --- a/include/configs/ls1012aqds.h
> +++ b/include/configs/ls1012aqds.h
> @@ -115,6 +115,8 @@
>   
>   #ifdef CONFIG_HAS_FSL_DR_USB
>   #define CONFIG_USB_EHCI_FSL
> +#define CONFIG_USB_ULPI
> +#define CONFIG_USB_ULPI_VIEWPORT
>   #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
>   #endif
>   
> diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
> index 847b698..cd3eb47 100644
> --- a/include/usb/ehci-ci.h
> +++ b/include/usb/ehci-ci.h
> @@ -156,7 +156,7 @@
>   #elif defined(CONFIG_MPC85xx)
>   #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR
>   #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR
> -#elif defined(CONFIG_ARCH_LS1021A)
> +#elif defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A)

Please use CONFIG_ARCH_LS1021A, not CONFIG_LS102XA.

York