[PATCH 2/4] ARM: sun8i: h3/h5: add DE2 CCU device node for H3
Icenowy Zheng
icenowy at aosc.io
Mon Sep 11 08:55:27 PDT 2017
The DE2 in H3/H5 has a clock control unit in it, and the behavior is
slightly different between H3 and H5.
Add the common parts in H3/H5 DTSI, and add the compatible string in H3
DTSI.
The compatible string of H5 DE2 CCU will be added in a separated patch.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 4 ++++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 14 ++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index b36f9f423c39..a8a1db79f362 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -85,6 +85,10 @@
compatible = "allwinner,sun8i-h3-ccu";
};
+&display_clocks {
+ compatible = "allwinner,sun8i-a83t-de2-clk";
+};
+
&mmc0 {
compatible = "allwinner,sun7i-a20-mmc";
clocks = <&ccu CLK_BUS_MMC0>,
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c2..76a4cbc99bdb 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -40,9 +40,11 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-h3-ccu.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-h3-ccu.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
@@ -85,6 +87,18 @@
#size-cells = <1>;
ranges;
+ display_clocks: clock at 1000000 {
+ /* compatible is in per SoC .dtsi file */
+ reg = <0x01000000 0x100000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
syscon: syscon at 1c00000 {
compatible = "allwinner,sun8i-h3-system-controller",
"syscon";
--
2.13.5
More information about the linux-arm-kernel
mailing list