[PATCH v4 1/3] PCI: Allow PCI_DEV_FLAGS_NO_BUS_RESET to be used on bus device
Jan Glauber
jglauber at cavium.com
Fri Sep 8 01:10:31 PDT 2017
From: David Daney <david.daney at cavium.com>
When checking to see if a PCI bus can safely be reset, we check to see
if any of the children have their PCI_DEV_FLAGS_NO_BUS_RESET flag set.
As these devices are known not to behave well after a bus reset.
Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.
Add a check for the PCI_DEV_FLAGS_NO_BUS_RESET flag being set in the
bridge device to allow these bridges to be flagged, and prevent their
buses from being reset.
A follow on patch will add a quirk for this type of bridge.
Signed-off-by: David Daney <david.daney at cavium.com>
[jglauber at cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber at cavium.com>
---
drivers/pci/pci.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fdf65a6c13f6..b2a46ca7f133 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4325,6 +4325,10 @@ static bool pci_bus_resetable(struct pci_bus *bus)
{
struct pci_dev *dev;
+
+ if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET))
+ return false;
+
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
(dev->subordinate && !pci_bus_resetable(dev->subordinate)))
--
2.9.0.rc0.21.g7777322
More information about the linux-arm-kernel
mailing list