[PATCH 3/3] phy: rockchip-typec: Do the calibration more correctly

[Doug Anderson]

Hi,

On Wed, Sep 6, 2017 at 1:52 PM, Douglas Anderson <dianders at chromium.org> wrote:
> Calculate the calibration code as per the docs.  The docs talk about
> reading and averaging the pullup and pulldown calibration codes.  They
> also talk about adding in some adjustment codes.  Let's do what the
> docs say.
>
> In practice this doesn't seem to matter a whole lot.  On a device I
> tested the pullup and pulldown codes were nearly the same (0x23 and
> 0x24) and the adjustment codes were 0.
>
> Reviewed-by: Chris Zhong <zyw at rock-chips.com>
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> ---
>
>  drivers/phy/rockchip/phy-rockchip-typec.c | 28 +++++++++++++++++++---------
>  1 file changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
> index b8696a7c45fb..e59983a82dcc 100644
> --- a/drivers/phy/rockchip/phy-rockchip-typec.c
> +++ b/drivers/phy/rockchip/phy-rockchip-typec.c
> @@ -194,6 +194,7 @@
>  /* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
>  #define AUX_CH_LANE                    8
>
> +

Not sure how I missed that this was adding a blank line here.  :(  If
there are no other issues I'm happy to re-post or happy if this blank
line is removed when the patch is applied.  Please let me know which
you'd prefer.

-Doug