[PATCH 6/8] bcm63xx_enet: just use "enet" as the clock name

[Jonas Gorski]

Hi David,

On 2 August 2017 at 11:34, Jonas Gorski <jonas.gorski at gmail.com> wrote:
> Now that we have the individual clocks available as "enet" we
> don't need to rely on the device id for them anymore.
>
> Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>

Could I please get a (N)Ack so Ralf can add this patch to his tree?


Regards
Jonas

> ---
>  drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> index 61a88b64bd39..d6844923a1c0 100644
> --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> @@ -1718,7 +1718,6 @@ static int bcm_enet_probe(struct platform_device *pdev)
>         struct bcm63xx_enet_platform_data *pd;
>         struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
>         struct mii_bus *bus;
> -       const char *clk_name;
>         int i, ret;
>
>         /* stop if shared driver failed, assume driver->probe will be
> @@ -1761,14 +1760,12 @@ static int bcm_enet_probe(struct platform_device *pdev)
>         if (priv->mac_id == 0) {
>                 priv->rx_chan = 0;
>                 priv->tx_chan = 1;
> -               clk_name = "enet0";
>         } else {
>                 priv->rx_chan = 2;
>                 priv->tx_chan = 3;
> -               clk_name = "enet1";
>         }
>
> -       priv->mac_clk = clk_get(&pdev->dev, clk_name);
> +       priv->mac_clk = clk_get(&pdev->dev, "enet");
>         if (IS_ERR(priv->mac_clk)) {
>                 ret = PTR_ERR(priv->mac_clk);
>                 goto out;
> --
> 2.13.2
>