Applied "ALSA: ac97: split out the generic ac97 registers" to the asoc tree
Mark Brown
broonie at kernel.org
Mon Sep 4 10:25:40 PDT 2017
The patch
ALSA: ac97: split out the generic ac97 registers
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 8e4f7d9b8c652b4eb3ceb790e1e9fe433f9e3b58 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik at free.fr>
Date: Sat, 2 Sep 2017 21:54:03 +0200
Subject: [PATCH] ALSA: ac97: split out the generic ac97 registers
Split out from the ac97_codec.h the ac97 generic registers, which can be
used by a codec, typically a generic ac97 codec, and by the ac97 bus, to
scan an ac97 AC-Link.
This split encompasses all the AC97 standard registers, but not the
codec specific ones.
In order to have a clean split between former ac97 bus implementation
and the new coming one in sound/ac97, it is safer to not include any
former ac97 includes, excepting in sound/ac97/compat.c.
Amongst the thing to isolate :
- don't have the struct snd_ac97 in sound/ac97/* (except compat.c) to not
be "fooled" by a definition which would come with ac97_codec.h by
"chance".
- don't have to have snd_a97_*() functions, as they rely on struct
snd_ac97.
- don't want the struct snd_ac97_bus_ops, there is a new one
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
Reviewed-by: Takashi Iwai <tiwai at suse.de>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++++++++++++++++
include/sound/ac97_codec.h | 239 +----------------------------------------
2 files changed, 263 insertions(+), 238 deletions(-)
create mode 100644 include/sound/ac97/regs.h
diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h
new file mode 100644
index 000000000000..4bb86d379bd5
--- /dev/null
+++ b/include/sound/ac97/regs.h
@@ -0,0 +1,262 @@
+/*
+ * Copyright (c) by Jaroslav Kysela <perex at perex.cz>
+ * Universal interface for Audio Codec '97
+ *
+ * For more details look to AC '97 component specification revision 2.1
+ * by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ * AC'97 codec registers
+ */
+
+#define AC97_RESET 0x00 /* Reset */
+#define AC97_MASTER 0x02 /* Master Volume */
+#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */
+#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */
+#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */
+#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */
+#define AC97_PHONE 0x0c /* Phone Volume (optional) */
+#define AC97_MIC 0x0e /* MIC Volume */
+#define AC97_LINE 0x10 /* Line In Volume */
+#define AC97_CD 0x12 /* CD Volume */
+#define AC97_VIDEO 0x14 /* Video Volume (optional) */
+#define AC97_AUX 0x16 /* AUX Volume (optional) */
+#define AC97_PCM 0x18 /* PCM Volume */
+#define AC97_REC_SEL 0x1a /* Record Select */
+#define AC97_REC_GAIN 0x1c /* Record Gain */
+#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */
+#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */
+#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */
+#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */
+#define AC97_POWERDOWN 0x26 /* Powerdown control / status */
+/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
+#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */
+#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */
+#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */
+#define AC97_SPDIF 0x3a /* S/PDIF control */
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */
+#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */
+#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */
+#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */
+#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */
+#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */
+#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */
+#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */
+#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */
+#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */
+#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */
+#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */
+#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */
+#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */
+/* range 0x5a-0x7b - Vendor Specific */
+#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */
+#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */
+/* range 0x60-0x6f (page 1) - extended codec registers */
+#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */
+#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */
+#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */
+#define AC97_FUNC_SELECT 0x66 /* Function Select */
+#define AC97_FUNC_INFO 0x68 /* Function Information */
+#define AC97_SENSE_INFO 0x6a /* Sense Details */
+
+/* volume controls */
+#define AC97_MUTE_MASK_MONO 0x8000
+#define AC97_MUTE_MASK_STEREO 0x8080
+
+/* slot allocation */
+#define AC97_SLOT_TAG 0
+#define AC97_SLOT_CMD_ADDR 1
+#define AC97_SLOT_CMD_DATA 2
+#define AC97_SLOT_PCM_LEFT 3
+#define AC97_SLOT_PCM_RIGHT 4
+#define AC97_SLOT_MODEM_LINE1 5
+#define AC97_SLOT_PCM_CENTER 6
+#define AC97_SLOT_MIC 6 /* input */
+#define AC97_SLOT_SPDIF_LEFT1 6
+#define AC97_SLOT_PCM_SLEFT 7 /* surround left */
+#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT 7
+#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */
+#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT 8
+#define AC97_SLOT_LFE 9
+#define AC97_SLOT_SPDIF_RIGHT1 9
+#define AC97_SLOT_MODEM_LINE2 10
+#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT2 10
+#define AC97_SLOT_HANDSET 11 /* output */
+#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT2 11
+#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */
+#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */
+
+/* basic capabilities (reset register) */
+#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */
+#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */
+#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */
+#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */
+#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */
+#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */
+#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */
+#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */
+#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */
+#define AC97_BC_DAC_MASK 0x00c0
+#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */
+#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */
+#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */
+#define AC97_BC_ADC_MASK 0x0300
+#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */
+
+/* general purpose */
+#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */
+#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
+#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
+
+/* powerdown bits */
+#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
+#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
+#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
+#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
+#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
+#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
+#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
+#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
+#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
+#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
+#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
+#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
+
+/* extended audio ID bit defines */
+#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
+#define AC97_EI_DRA 0x0002 /* Double rate supported */
+#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */
+#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */
+#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */
+#define AC97_EI_DACS_SLOT_SHIFT 4
+#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */
+#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */
+#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */
+#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */
+#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */
+#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */
+#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */
+#define AC97_EI_REV_SHIFT 10
+#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */
+#define AC97_EI_ADDR_SHIFT 14
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */
+#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */
+#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */
+#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */
+#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */
+#define AC97_EA_SPSA_SLOT_SHIFT 4
+#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */
+#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO 0x0001 /* Professional status */
+#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */
+#define AC97_SC_COPY 0x0004 /* Copyright status */
+#define AC97_SC_PRE 0x0008 /* Preemphasis status */
+#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */
+#define AC97_SC_CC_SHIFT 4
+#define AC97_SC_L 0x0800 /* Generation Level status */
+#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_SHIFT 12
+#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */
+#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */
+#define AC97_SC_V 0x8000 /* Validity status */
+
+/* Interrupt and Paging bit defines (AC'97 2.3) */
+#define AC97_PAGE_MASK 0x000f /* Page Selector */
+#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */
+#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */
+#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */
+#define AC97_INT_SENSE 0x1000 /* Sense Cycle */
+#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */
+#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */
+#define AC97_INT_STATUS 0x8000 /* Interrupt Status */
+
+/* extended modem ID bit defines */
+#define AC97_MEI_LINE1 0x0001 /* Line1 present */
+#define AC97_MEI_LINE2 0x0002 /* Line2 present */
+#define AC97_MEI_HANDSET 0x0004 /* Handset present */
+#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */
+#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */
+#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */
+#define AC97_MEI_ADDR_SHIFT 14
+
+/* extended modem status and control bit defines */
+#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */
+#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */
+#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */
+#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */
+#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */
+#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */
+#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */
+#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */
+#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */
+#define AC97_MEA_PRB 0x0200 /* reserved */
+#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */
+#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */
+#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */
+#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */
+#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */
+#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */
+
+/* modem gpio status defines */
+#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */
+#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */
+#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */
+#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */
+#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */
+#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */
+#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */
+#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */
+#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */
+#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */
+#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */
+#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */
+#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */
+#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */
+#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */
+#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */
+
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 15aa5f07c955..89d311a503d3 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -28,6 +28,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/workqueue.h>
+#include <sound/ac97/regs.h>
#include <sound/pcm.h>
#include <sound/control.h>
#include <sound/info.h>
@@ -35,244 +36,6 @@
/* maximum number of devices on the AC97 bus */
#define AC97_BUS_MAX_DEVICES 4
-/*
- * AC'97 codec registers
- */
-
-#define AC97_RESET 0x00 /* Reset */
-#define AC97_MASTER 0x02 /* Master Volume */
-#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */
-#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */
-#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */
-#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */
-#define AC97_PHONE 0x0c /* Phone Volume (optional) */
-#define AC97_MIC 0x0e /* MIC Volume */
-#define AC97_LINE 0x10 /* Line In Volume */
-#define AC97_CD 0x12 /* CD Volume */
-#define AC97_VIDEO 0x14 /* Video Volume (optional) */
-#define AC97_AUX 0x16 /* AUX Volume (optional) */
-#define AC97_PCM 0x18 /* PCM Volume */
-#define AC97_REC_SEL 0x1a /* Record Select */
-#define AC97_REC_GAIN 0x1c /* Record Gain */
-#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */
-#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */
-#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */
-#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */
-#define AC97_POWERDOWN 0x26 /* Powerdown control / status */
-/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
-#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */
-#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */
-#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */
-#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */
-#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */
-#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */
-#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */
-#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */
-#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */
-#define AC97_SPDIF 0x3a /* S/PDIF control */
-/* range 0x3c-0x58 - MODEM */
-#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */
-#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */
-#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */
-#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */
-#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */
-#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */
-#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */
-#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */
-#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */
-#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */
-#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */
-#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */
-#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */
-#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */
-/* range 0x5a-0x7b - Vendor Specific */
-#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */
-#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */
-/* range 0x60-0x6f (page 1) - extended codec registers */
-#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */
-#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */
-#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */
-#define AC97_FUNC_SELECT 0x66 /* Function Select */
-#define AC97_FUNC_INFO 0x68 /* Function Information */
-#define AC97_SENSE_INFO 0x6a /* Sense Details */
-
-/* volume controls */
-#define AC97_MUTE_MASK_MONO 0x8000
-#define AC97_MUTE_MASK_STEREO 0x8080
-
-/* slot allocation */
-#define AC97_SLOT_TAG 0
-#define AC97_SLOT_CMD_ADDR 1
-#define AC97_SLOT_CMD_DATA 2
-#define AC97_SLOT_PCM_LEFT 3
-#define AC97_SLOT_PCM_RIGHT 4
-#define AC97_SLOT_MODEM_LINE1 5
-#define AC97_SLOT_PCM_CENTER 6
-#define AC97_SLOT_MIC 6 /* input */
-#define AC97_SLOT_SPDIF_LEFT1 6
-#define AC97_SLOT_PCM_SLEFT 7 /* surround left */
-#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT 7
-#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */
-#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT 8
-#define AC97_SLOT_LFE 9
-#define AC97_SLOT_SPDIF_RIGHT1 9
-#define AC97_SLOT_MODEM_LINE2 10
-#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT2 10
-#define AC97_SLOT_HANDSET 11 /* output */
-#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT2 11
-#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */
-#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */
-
-/* basic capabilities (reset register) */
-#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */
-#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */
-#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */
-#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */
-#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */
-#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */
-#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */
-#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */
-#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */
-#define AC97_BC_DAC_MASK 0x00c0
-#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */
-#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */
-#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */
-#define AC97_BC_ADC_MASK 0x0300
-#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */
-
-/* general purpose */
-#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */
-#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
-#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
-
-/* powerdown bits */
-#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
-#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
-#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
-#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
-#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
-#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
-#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
-#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
-#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
-#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
-#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
-#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
-
-/* extended audio ID bit defines */
-#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
-#define AC97_EI_DRA 0x0002 /* Double rate supported */
-#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */
-#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */
-#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */
-#define AC97_EI_DACS_SLOT_SHIFT 4
-#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */
-#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */
-#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */
-#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */
-#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */
-#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */
-#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */
-#define AC97_EI_REV_SHIFT 10
-#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */
-#define AC97_EI_ADDR_SHIFT 14
-
-/* extended audio status and control bit defines */
-#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */
-#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */
-#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */
-#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */
-#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */
-#define AC97_EA_SPSA_SLOT_SHIFT 4
-#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */
-#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */
-#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */
-#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */
-#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */
-#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */
-#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */
-#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */
-#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */
-#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */
-#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */
-#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */
-#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */
-
-/* S/PDIF control bit defines */
-#define AC97_SC_PRO 0x0001 /* Professional status */
-#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */
-#define AC97_SC_COPY 0x0004 /* Copyright status */
-#define AC97_SC_PRE 0x0008 /* Preemphasis status */
-#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */
-#define AC97_SC_CC_SHIFT 4
-#define AC97_SC_L 0x0800 /* Generation Level status */
-#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */
-#define AC97_SC_SPSR_SHIFT 12
-#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */
-#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */
-#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */
-#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */
-#define AC97_SC_V 0x8000 /* Validity status */
-
-/* Interrupt and Paging bit defines (AC'97 2.3) */
-#define AC97_PAGE_MASK 0x000f /* Page Selector */
-#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */
-#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */
-#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */
-#define AC97_INT_SENSE 0x1000 /* Sense Cycle */
-#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */
-#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */
-#define AC97_INT_STATUS 0x8000 /* Interrupt Status */
-
-/* extended modem ID bit defines */
-#define AC97_MEI_LINE1 0x0001 /* Line1 present */
-#define AC97_MEI_LINE2 0x0002 /* Line2 present */
-#define AC97_MEI_HANDSET 0x0004 /* Handset present */
-#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */
-#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */
-#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */
-#define AC97_MEI_ADDR_SHIFT 14
-
-/* extended modem status and control bit defines */
-#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */
-#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */
-#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */
-#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */
-#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */
-#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */
-#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */
-#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */
-#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */
-#define AC97_MEA_PRB 0x0200 /* reserved */
-#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */
-#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */
-#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */
-#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */
-#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */
-#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */
-
-/* modem gpio status defines */
-#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */
-#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */
-#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */
-#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */
-#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */
-#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */
-#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */
-#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */
-#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */
-#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */
-#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */
-#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */
-#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */
-#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */
-#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */
-#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */
-
/* specific - SigmaTel */
#define AC97_SIGMATEL_OUTSEL 0x64 /* Output Select, STAC9758 */
#define AC97_SIGMATEL_INSEL 0x66 /* Input Select, STAC9758 */
--
2.14.1
More information about the linux-arm-kernel
mailing list