[PATCH 09/10] arm64: allwinner: a64: Add device node for DMA controller
Stefan Brüns
stefan.bruens at rwth-aachen.de
Sun Sep 3 15:41:00 PDT 2017
The A64 SoC has a DMA controller that supports 8 DMA channels
to and from various peripherals. The last used DRQ port is 27.
Add a device node for it.
Signed-off-by: Stefan Brüns <stefan.bruens at rwth-aachen.de>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 882e2155f0aa..ccec81c4e9d2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -136,6 +136,17 @@
reg = <0x01c00000 0x1000>;
};
+ dma: dma-controller at 01c02000 {
+ compatible = "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <8>;
+ dma-requests = <27>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
mmc0: mmc at 1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
--
2.14.1
More information about the linux-arm-kernel
mailing list