[PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus.
Florian Fainelli
f.fainelli at gmail.com
Sat Sep 2 09:25:33 PDT 2017
On 09/02/2017 08:48 AM, Scott Branden wrote:
> Looks good
>
> On Sep 1, 2017 7:10 PM, "Florian Fainelli" <f.fainelli at gmail.com
> <mailto:f.fainelli at gmail.com>> wrote:
>
>
>
> On 08/31/2017 01:16 PM, Scott Branden wrote:
> > Hi Eric,
> >
> > mode is correct, location in file needs to be moved.
> >
> >
> > On 17-08-31 11:54 AM, Eric Anholt wrote:
> >> This doesn't yet enable it on any particular platform, as we still
> >> need a panel driver for bcm911360_entphn.
> >>
> >> Signed-off-by: Eric Anholt <eric at anholt.net <mailto:eric at anholt.net>>
> >> ---
> >>
> >> These bits are just carving off a little bit of my 911360_entphn
> panel
> >> series, to reduce conflicts when rebasing (which I just did for
> >> testing pl111 changes for cygnus regressions). I'm waiting to get my
> >> current RPi panel driver in before working on the 911360 panel again.
> >>
> >> arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++
> >> 1 file changed, 10 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi
> >> b/arch/arm/boot/dts/bcm-cygnus.dtsi
> >> index 7c957ea06c66..74f73ff24aec 100644
> >> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> >> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> >> @@ -575,6 +575,16 @@
> >> status = "disabled";
> >> };
> >> + clcd: clcd at 180a0000 {
> > please place in correct address ordered location in file
>
> I moved it right above the v3d node to keep the nodes ordered by unit
> address, please check the result here:
>
> https://github.com/Broadcom/stblinux/commit/4d1e42c6b9d28ce7b74d92258435f9d16834ae75
> <https://github.com/Broadcom/stblinux/commit/4d1e42c6b9d28ce7b74d92258435f9d16834ae75>
>
>
> With Moved location
> Acked-by: Scott Branden <scott.branden at broadcom.com
> <mailto:scott.branden at broadcom.com>>
Pushed in place with your tag added, thanks!
--
Florian
More information about the linux-arm-kernel
mailing list