[PATCH] clk: at91: utmi: set the mainck rate
Boris Brezillon
boris.brezillon at free-electrons.com
Fri Sep 1 05:03:58 PDT 2017
On Fri, 1 Sep 2017 11:46:58 +0200
Ludovic Desroches <ludovic.desroches at microchip.com> wrote:
> By default, it is assumed that the UTMI clock is generated from a 12 MHz
> reference clock (MAINCK). If it's not the case, the FREQ field of the
> SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
> proper way.
>
> The UTMI clock has a fixed rate of 480 MHz. In fact, there is no multiplier
> we can configure. The multiplier is managed internally, depending on the
> reference clock frequency, to achieve the target of 480 MHz.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches at microchip.com>
> ---
>
> Hi Ingo,
>
> I reworked the patch I sent since I observed some side effects with the
> generated clock driver. Moreover, reconfiguring the SFR register at each
> prepare was not needed.
>
> On my side, it fixes my issues. Does this patch sound good to you?
>
> Thanks
>
> Ludovic
>
> drivers/clk/at91/clk-utmi.c | 96 ++++++++++++++++++++++++++++++++++++--------
> include/soc/at91/atmel-sfr.h | 2 +
> 2 files changed, 81 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
> index aadabd9d1e2b..f43196ed537d 100644
> --- a/drivers/clk/at91/clk-utmi.c
> +++ b/drivers/clk/at91/clk-utmi.c
> @@ -14,14 +14,20 @@
> #include <linux/of.h>
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> +#include <soc/at91/atmel-sfr.h>
>
> #include "pmc.h"
>
> -#define UTMI_FIXED_MUL 40
> +/*
> + * The purpose of this clock is to generate a 480 MHz signal. A different
> + * rate can't be configured.
> + */
> +#define UTMI_RATE 480000000
>
> struct clk_utmi {
> struct clk_hw hw;
> - struct regmap *regmap;
> + struct regmap *regmap_pmc;
> + struct regmap *regmap_sfr;
> };
>
> #define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw)
> @@ -41,9 +47,9 @@ static int clk_utmi_prepare(struct clk_hw *hw)
> unsigned int uckr = AT91_PMC_UPLLEN | AT91_PMC_UPLLCOUNT |
> AT91_PMC_BIASEN;
>
> - regmap_update_bits(utmi->regmap, AT91_CKGR_UCKR, uckr, uckr);
> + regmap_update_bits(utmi->regmap_pmc, AT91_CKGR_UCKR, uckr, uckr);
>
> - while (!clk_utmi_ready(utmi->regmap))
> + while (!clk_utmi_ready(utmi->regmap_pmc))
> cpu_relax();
>
> return 0;
> @@ -53,21 +59,21 @@ static int clk_utmi_is_prepared(struct clk_hw *hw)
> {
> struct clk_utmi *utmi = to_clk_utmi(hw);
>
> - return clk_utmi_ready(utmi->regmap);
> + return clk_utmi_ready(utmi->regmap_pmc);
> }
>
> static void clk_utmi_unprepare(struct clk_hw *hw)
> {
> struct clk_utmi *utmi = to_clk_utmi(hw);
>
> - regmap_update_bits(utmi->regmap, AT91_CKGR_UCKR, AT91_PMC_UPLLEN, 0);
> + regmap_update_bits(utmi->regmap_pmc, AT91_CKGR_UCKR,
> + AT91_PMC_UPLLEN, 0);
> }
>
> static unsigned long clk_utmi_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> - /* UTMI clk is a fixed clk multiplier */
> - return parent_rate * UTMI_FIXED_MUL;
> + return UTMI_RATE;
> }
>
> static const struct clk_ops utmi_ops = {
> @@ -78,12 +84,14 @@ static const struct clk_ops utmi_ops = {
> };
>
> static struct clk_hw * __init
> -at91_clk_register_utmi(struct regmap *regmap,
> +at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
> const char *name, const char *parent_name)
> {
> struct clk_utmi *utmi;
> - struct clk_hw *hw;
> + struct clk_hw *hw, *hw_parent;
> struct clk_init_data init;
> + unsigned int utmi_ref_clk_freq;
> + unsigned long parent_rate;
> int ret;
>
> utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
> @@ -97,15 +105,64 @@ at91_clk_register_utmi(struct regmap *regmap,
> init.flags = CLK_SET_RATE_GATE;
>
> utmi->hw.init = &init;
> - utmi->regmap = regmap;
> + utmi->regmap_pmc = regmap_pmc;
> + utmi->regmap_sfr = regmap_sfr;
>
> hw = &utmi->hw;
> ret = clk_hw_register(NULL, &utmi->hw);
> if (ret) {
> - kfree(utmi);
> hw = ERR_PTR(ret);
> + goto free_utmi;
> + }
> +
> + /*
> + * If mainck rate is different from 12 MHz, we have to configure the
> + * FREQ field of the SFR_UTMICKTRIM register to generate properly
> + * the utmi clock.
> + */
> + hw_parent = clk_hw_get_parent(hw);
> + parent_rate = clk_hw_get_rate(hw_parent);
Hm, not sure this is safe to do that. AFAIR, when the UTMI clock is
being registered you're not guaranteed that the parent has been
registered, so accessing it in this function looks a bit risky to me.
> +
> + switch (parent_rate) {
> + case 12000000:
> + utmi_ref_clk_freq = 0;
> + break;
> + case 16000000:
> + utmi_ref_clk_freq = 1;
> + break;
> + case 24000000:
> + utmi_ref_clk_freq = 2;
> + break;
> + /*
> + * Not supported on SAMA5D2 but it's not an issue since MAINCK
> + * maximum value is 24 MHz.
> + */
> + case 48000000:
> + utmi_ref_clk_freq = 3;
> + break;
> + default:
> + pr_err("UTMICK: unsupported mainck rate\n");
> + goto unregister_clk_hw;
> + }
> +
> + if (!utmi->regmap_sfr) {
> + if (utmi_ref_clk_freq) {
> + pr_err("UTMICK: sfr node required\n");
> + goto unregister_clk_hw;
> + }
> }
>
> + regmap_update_bits(utmi->regmap_sfr, AT91_SFR_UTMICKTRIM,
> + AT91_UTMICKTRIM_FREQ, utmi_ref_clk_freq);
> +
> + return hw;
> +
> +unregister_clk_hw:
> + clk_hw_unregister(hw);
> + hw = NULL;
> +free_utmi:
> + kfree(utmi);
> +
> return hw;
> }
>
> @@ -114,18 +171,23 @@ static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
> struct clk_hw *hw;
> const char *parent_name;
> const char *name = np->name;
> - struct regmap *regmap;
> + struct regmap *regmap_pmc, *regmap_sfr;
>
> parent_name = of_clk_get_parent_name(np, 0);
>
> of_property_read_string(np, "clock-output-names", &name);
>
> - regmap = syscon_node_to_regmap(of_get_parent(np));
> - if (IS_ERR(regmap))
> + regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
> + if (IS_ERR(regmap_pmc))
> return;
>
> - hw = at91_clk_register_utmi(regmap, name, parent_name);
> - if (IS_ERR(hw))
> + /* SFR node missing is not necessarily an issue. */
> + regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
> + if (IS_ERR(regmap_sfr))
> + regmap_sfr = NULL;
> +
> + hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
> + if (!hw || IS_ERR(hw))
> return;
>
> of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
> diff --git a/include/soc/at91/atmel-sfr.h b/include/soc/at91/atmel-sfr.h
> index 506ea8ffda19..a990f6c1e18c 100644
> --- a/include/soc/at91/atmel-sfr.h
> +++ b/include/soc/at91/atmel-sfr.h
> @@ -17,6 +17,7 @@
> /* 0x08 ~ 0x0c: Reserved */
> #define AT91_SFR_OHCIICR 0x10 /* OHCI INT Configuration Register */
> #define AT91_SFR_OHCIISR 0x14 /* OHCI INT Status Register */
> +#define AT91_SFR_UTMICKTRIM 0x30
> #define AT91_SFR_I2SCLKSEL 0x90 /* I2SC Register */
>
> /* Field definitions */
> @@ -28,5 +29,6 @@
> AT91_OHCIICR_SUSPEND_B | \
> AT91_OHCIICR_SUSPEND_C)
>
> +#define AT91_UTMICKTRIM_FREQ GENMASK(1, 0)
>
> #endif /* _LINUX_MFD_SYSCON_ATMEL_SFR_H */
More information about the linux-arm-kernel
mailing list